Daewoo DV-500 owner manual Dolby Digital Setup

FUNCTION SETTING

DIGITAL OUTPUT

•SPDIF OFF

No signal is output from the coaxial, optical port.

•SPDIF/RAW

Select this when the DVD player is connected with a power amplifier through optical or coaxial port. Please refer to the page 14. when a Dolby Digital DVD, DTS DVD or MPEG DVD is played, select this, the coaxial or optical port will output in the corresponding digital format (source code). The power amplifier to be connected must have Dolby Digital, DTS and MPEG DVD is played, the optical or coaxial port will output in PCM 2-channel format.

•SPDIF/PCM

Select this when the DVD player is connected with a TV or a power amplifier through an audio cord.

CAPTIONS

The hidden subtitle is shown or turned off.

SCREEN SAVER

Start the screen saver, the screen saver image appears when the unit stops or the image is motionless for a few minutes. This saver can keep the screen from being damaged.

DOLBY DIGITAL SETUP

DUAL MONO

This is the output mode of the L and R signals of the set audio output. If it is set to "MIX– MONO", the function only works when the DVD being played is 2.0-channel.

•STEREO

Choose this option, the audio output should be a dummy stereo signal.

•L–MONO

•R–MONO

•MIX–MONO

DYNAMIC RANGE

Set "OFF" to view a program in the dynamic range as recorded in the disc. If you hear loud sounds softer and soft sounds louder, set "FULL".

–– FULL

––

–– 3/4

––

–– 1/2

––

–– 1/4

––

–– OFF

29