Daewoo DLT-32C7, DLT-37C7, DLT-32C5 When connecting PC, STB, DVD with Multimedia, Hdmi & PC mode

Selection of AV and

Multimedia Input Signal

When connecting PC, STB, DVD with Multimedia

1.Pressing the “MULTIMEDIA” button on the remote controller.

• The screen changes as follows:

PC => HDMI => Component => PC PC

CLOCK 1 2 : 0 0

Component		HDMI
CLOCK	1 2 : 0 0	CLOCK	1 2 : 0 0

HDMI & PC mode

1.For optimum picture quality, use 1360(6)x768 computer or set top box output at a 60Hz refresh rate. Using other formats or refresh rates may result in reduced picture quality.

2.If the message‘No signal’appears on the screen, adjust the PC output to a format listed in the Multimedia Input table.

Multimedia Input Format

Resolution	V-freq	HDMI	PC(D-Sub)	Component	Standard
	60Hz	o	o	x
640 x 480	72Hz	o	o	x
	75Hz	o	o	x	VESA Standard
	60Hz	o	o	x	VESA Standard
800 x 600	72Hz	o	o	x	VESA Standard
	75Hz	o	o	x
	60Hz	o	o	x	VESA Standard
1024 x 768	70Hz	o	o	x	VESA Standard
	75Hz	o	o	x	VESA Standard
1360(6) x 768	60Hz	o	o	x
	75Hz	o	o	x
720 x 480	60Hz	o	o	o
720 x 576	50Hz	o	o	o
1280 x 720	50Hz	o	o	o
	60Hz	o	o	o
1920 x 1080i	50Hz	o	x	o
	60Hz	o	x	o
720 x 480i	60Hz	x	x	o
720 x 576i	50Hz	x	x	o

Note :

•1280 x 720 mode is commonly used for Component.

•So if this mode is used at PC mode, the screen can be enlarged.

38