Daewoo F227B manual 20/22

Page 23

F227B

17" TFT LCD Color Monitor

Problem

Possible solution

 

 

Color defects

Check that the signal cable connector is properly connected and that

 

the connection pins are not bent or damaged. Try another color

 

temperature.

Size, position,

Adjust the picture characteristics as described in the section OSD

shape or quality

Adjustment(4-3).

unsatisfactory

 

Duplicated

A problem with your graphics adapter or display unit. Contact your

images

service representative.

Image is not

Check that the display resolution and frequency from your PC or

stable

graphic adapter is an available mode for your monitor.

 

In your PC, you can check through Control panel, Display, Settings.

 

If the setting is not correct, use your computer utility program to

 

change the display settings.

Message :

Check that the signal cabel connector is properly connected and that

No signal

the connection pins are not bent or damaged.

 

If the connector is loose, tighten the connector’s screws.

 

Check that the computer is switched on.

The power LED is

To enter a power saving mode. You can reactivate the system by

a orange color

pressing any key or moving the mouse.

20/22

Image 23
Contents User’s Guide Page F227B Introduction F227B Cleaning and Maintenance Installing the monitor F227BBACK Selecting a suitable location Connecting the monitor Line OUT Audio system Setting the refresh rate 10/22 11/22 12/22 1280x1024 H63.9 14/22 15/22 16/22 17/22 Display power management Troubleshooting 20/22 21/22 Specifications