Daewoo DT- 4280NH user manual Input Select, Select a Desired Channel and Function, Component1

3	Input Select
	MULTIMEDIA	• Select [Component 1 or Component 2] by

pressing the “Multimedia” button of the Remote Control or using the “INPUT SELECT” button of the PDP unit.

• Each time you press the “Multimedia” button, different input modes appear. The sequence is as follows:

Component1

PC

Component2

DVI

4 Select a Desired Channel and Function

• Select a desired channel and function by using the Remote Control of the Digital Broadcasting Receiver.

NOTES:

1)Possible Digital Broadcasting signals: 1080i, 720p, 480p.

2)Antenna Connection:

Apartment : Check if communal aerial receives digital broadcasts.

Private Houses: Set the indoor/outdoor UHF antenna to the direction of the digital broadcasting transmitting company.

3)For detailed connection method, refer to the Owner’s Manual of Digital Broadcasting Receiver.

4)What is a component? : Signals with which luminance and chrominance are separated, producing a sharp picture.

5)If the Digital Broadcasting Receiver has PC Output terminal or DVI Output terminal, connect to ‘PC INPUT’ or ‘DVI INPUT’ at the back panel of the PDP.

When watching the PDP by PC or DVI Input, some undesired signals may be seen at the top and bottom area of the screen. In this case, select [Menu] --> [Screen] --> [V. Size] to adjust.

27