Before Requesting Service
Before requesting for service, check the following points once again.
•Remote control does not function properly.
•Check for any obstacle between the
Remote Control and the Display.
•Check for dead batteries and incorrect battery orientation.
•Check if the Remote Control is the right one.
•Remove any obstacle between the Remote Control and the Display.
•Replace batteries and use the correct polarity (+) or (-) of the batteries.
•Use the correct Remote Control proper to the model.
•The Display makes a snapping sound.
•Check if the pictures and sound are
normal.
•This sound is produced due to variations in room temperature.
•This sound does not indicate that the Display has a problem if the pictures and sound can be viewed and heard properly.
•There are empty spots at the top and the bottom area of the screen.
•Check if the screen size of an image
is wider than 16:9 aspect ratio (theatre screen size).
•When video screen is wider than 16:9 aspect ratio, you may see dark areas at the top and the bottom of the screen.
Before Requesting for Service
•There are spots on the screen or screen rolls.
•Check if your product is affected by
any interference from automobiles, high-voltage transmission lines, neon signs or other potential sources.
•Screen size is suddenly changed.
•The screen size of a video image may not
be matched to the size of the dark initial screen.
• Check by using other video tape.
DT-42A1
Proper use guarantees Product life
42VGA wide Plasma Panel Built in 2-Analog Tuners
Features
Installation
Safety Precautions
Power
During Use
It can result in a risk of electric shock
It may cause malfunction
Watching the TV for a long time may hurt your eye sight
It may damage the power cord, causing fire or electric shock
Ferrite Core
Checking Accessories
Supplied Accessories
Optional Accessories
Page
Contents
Front / Side
Panel Controls
Rear
Installing the batteries in your remote control
Remote Control Setup
Antenna Connection
When a coaxial cable is used
When a feeder cable is used
TV antenna installation may be found in most
Antenna combining Adapter Separate purchase
Single Antenna Connection
Separate Antenna Connection
VHF Antenna UHF Antenna
To Watch TV
To Watch TV
Select Program
Adjust Volume
Press the Power Button to Turn the TV off
Press the ON/OFF button
Press the VOL Button
Install Program
Install
Press the Menu Button
Auto Search is completed
Select the Auto Setup
Select the Country
Select the Search
Skipping the Channels
Edit
Deleting the Program
Moving the Program Positions
Fine Tune
Manual Setup
Find the Desired Channel
SECAM-L and Audio B/G, DK, I, L
Name the program
Select the Video and Audio System
You can select the Video PAL,SECAM
Press VOL
Setup
Memorize the Program
Can find the desired channel, but it
Watching Digital Broadcasts
Press the Power Buttons
Watching Digital Broadcasts
Select the Desired Channel and Function
Input Select
Watching Cable Broadcasts
Press the Power Buttons
Watching Cable Broadcasts
Select the Desired Program and Function
Input Select
Turn the PDP and the Satellite receiver on
Watching Satellite Broadcasts
Watching Satellite Broadcasts
Video/Audio
AVS3
By using the Remote Control
Connect a DVD Player to the PDP
Watching a DVD Image
Select the Desired Title and Function
Watching a VCR Image
Watching a VCR Image
Select the desired title and function
By using the remote control of the VCR
Video by pressing the AV button
Game Console/Camcorder
Watching a Camcorder/Game Console Image
Watching a Camcorder/Game Console Image
Connect a Camcorder/Game Console to the PDP
By pressing the AV button
Remote Control or the Input Select
Select Function
Select AV 1Scart, AV 2Scart or AV
Resolution of the PC
Connecting PC15pin D-sub
Connecting PC
Before Connecting to the PDP, Set
Turn on the PDP and the PC
Remote control or PDP unit
Different input mode appears
Shown below
Connecting Pcdvi
This product supports resolution of VGA, SVGA, XGA
This product is supported by Plug and Play only at DVI
Restart the computer if this happens
PC and DVI Input Resolution Available in PDP
Page
Menu on the Screen will disappear
Selecting Picture Mode
Selecting Picture Mode
Selecting Picture Mode
Press the Menu Button
Select the User Mode
Customising Picture
Customising Picture
Resolution level of picture respectively
Select User Mode Adjustments
Picture Condition Adjustments
CTI function adjust the noise reduction and color
Press the Screen Size Button
Adjusting with Screen Size button
Case of PC input
Adjusting Screen
You can adjust the screen in the menu
Buttons
Adjusting Screen in the Menu
Press the Volume VOL
Function
Press the Still Button
Watching a Still Image
Watching a Still Image
Mode is exited.Swap the pictures
Engaging PIP mode
Available PIP Input Combinations
Watching Two Pictures Simultaneously
Select the program
Select the Input Source
Menu will Disappear
Adjusting Auto Sound Mode
Sound Mode
Select Sound Mode
Select Sound Balance
Customising Sound Mode
Customising Sound Mode
Press PR Button
Effect Used to emphasize stereo effect
Select the Effect Mode
VOL buttons
Customising Sound Mode
Select the Sound Mode
Select the Sound Mode by pressing
Press the Input Signal Selecting Button
Selecting Input Signal
Press the Recall Button
Checking the Current Input Signal
Checking Current Input Signal
Menu Background, Language and Child Lock Setting
Whenever VOL
Menu Background, Language and Child Lock Setting
Child Lock Setting
Different languages
Mgdi Meta Genuine Digital Image
Select Features
Front panel LED lights
Auto Power Setting
Indicator
Auto Power Setting
Menu screen will be displayed as below
Time Setting
Off-Time and Wake time setting
Time Setting
Time Setting
Image Burn Minimisation
ISM Image Sticking Minimisation
Press the PR Button
Between ON/OFF
ISM Image Sticking Minimisation
Select Functions
Function by the PR
Back to Initialization
Initialize Setting
To return to MENU, press Menu button
Initialize Setting
Button
After selecting YES by the PR button
Press the Sleep Button
Setting Sleep Timer
Sleep Timer off
Sleep Timer
Teletext
Calling Up Subpage Directly
Remote control does not function properly
Before Requesting Service
Component Input Two Y, Pb/Cb, Pr/Cr RCA Jack
Diagonal Size 106 cm Screen Aspect Ratio 169 System
DVI-D Digital Only Jack
One 15 pin D-sub jack