Daewoo DTQ 27U8SC instruction manual Troubleshooting

Page 32

C H A P T E R 7

Troubleshooting

Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below.

If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an authorized Daewoo service center.

There is no picture or sound, or the TV dosen't turn on.

Make sure the TV is plugged in.

Make sure the MUTE is not set.

Make sure the power is on.

If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in and try again.

There is no picture or sound on some UHF channels.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.

See if anything is interfering with the antenna signal.

Make sure the AIR/CABLE setting is correct.

The sound is OK, but the picture is poor.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected and is in good working order, has no broken wires, and is adjusted correctly.

The picture is OK, but the sound is poor.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and adjusted correctly.

There is poor reception on some channels.

Try another station. If the other stations are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.

You cannot tune to a cable channel.

Make sure the AIR/CABLE setting is correct.

The channel may not be programmed into memory.

The picture rolls, slants, shows lines, is grainy, has poor color, or has ghosts.

Try another station. If the other station are OK, it may be a station problem.

Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.

See of anything is interfering with the antenna signal.

The remote control does not work.

Make sure the TV is plugged in.

Make sure there are fresh batteries in the remote control.

Make sure there is nothing blocking the remote control signal.

Troubleshooting 27

Image 32
Contents Color Television Risk of Electric Shock Important Safeguards When the power-supply cord or plug is damaged or frayed Daewoo Electronics Corporation of America Table of Contents Overview of Your Equipment Your TVs Front PanelCb Cr Your TVs Back PanelAntenna terminalANT Your Remote Control MuteInstalling your remote control batteries Connecting an Antenna or Cable to Your TV Connecting an AntennaConnecting a cable system Antennas with two sets of leadsConnecting Other Pieces of Equipment Safety NoteOperating Your TV Turning Your TV OnProgramming Your TVs Channel Memory Set-UpChanging the Volume Changing ChannelsChanging the TVs Channel Memory Displaying the Current ChannelAdding/Deleting a channel to memory Add/Delete ChannelsChanging the TVs Input Adjusting Video Settings VideoReturning to the factory settings Descriptions of video settingsUsing Timer Functions Setting the ClockSetting the Wake-up Time TimeSetting the Off Time Canceling the Wake-up Time or Off TimeSetting the Sleep Timer Using the Special Features Changing the Language of the On-screen MenusCaptioning SpecialPower Restore CC on MuteDynamic Sound Ch LabelsClearing Channel Labels Parental Control Settings Repeat the Password # # # #Rating All FV D L S Description of Parental Control SettingsParental Control No Ratings means Mini GlossaryAdjusting the Sound Selecting stereo/SAPListening to stereo sound Listening to second LanguageSetting Surround function Adjust Bass or TrebleAdjusting the Balance About AVCTroubleshooting Warranty Daewoo Electronics Corporation of America