Menu Installation

Key Process for TV mode

Edit Channel

To attach the names to each channel number and put them in the correct order, conduct the following procedure:-

Press the MENU button and then press arrow-right (VOL+) once and then the down-PR button to select EDIT CHANNEL. Now press the OK button to bring up the edit screen (see pic).

You will note that there are no channel names in the Edit list only programme numbers. To put names and numbers in the correct order, do the following:

1.select Pr 01 and right-arrow (VOL+)

2.press OK

3.press up- or –down PR – to select letter or number

4.press VOL+ to select next dash

5.repeat process until name is completed

6.press OK button to store

From this position, once all available channels have been named they can be sorted into the correct order.

1.press left-arrow (VOL-) and select the channel you wish to be number one using up- down-PR buttons, example: BBC1 should be in position Pr 01

2.press OK. The number will turn green

3.press up-PR button to select Pr number 01 to match the channel

4.press OK to store. The number will turn black

5.press down-PR button to select channel you wish to be number two

6.press OK. The number will turn green

7.press up-PR button to select Pr number 02 to match the channel

8.press OK. The number will turn black

9.repeat process on all other Pr numbers

Continue this process with all other programme numbers until they are in their correct order (see pic).

Found channels that are not required can be skipped [SKIP] when selecting your channels via the up- or down-PR buttons. This is achieved by selecting the SKIP column in the Edit channel mode with right-arrow (VOL+) button. Then press the OK button and the X will change to RED. Change this to O with the down-PR button and then press the OK button to store it (changing it to BLACK). To unskip a channel reverse the above process.