DirecTV RC64 manual Searching for TV, AV1 or AV2 Codes

Page 10

7.Repeat steps 1 through 6 to set up a new component under AV2 (or AV1).

8.For future reference write down the working code for the component(s) set up under AV1 and AV2 below:

AV1:

COMPONENT: ___________________

AV2:

COMPONENT:___________________

SEARCHING FOR TV, AV1 OR AV2 CODES

If you were unable to find the code for your brand of TV or component, you can try a code search. This process may take up to 30 minutes.

1.Turn on the TV or component. Insert a tape or disk if applicable.

2.Slide the MODE switch to the TV, AV1 or AV2 position, as desired.

3.Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice, then release both keys.

4.Enter 9-9-1followed by one of the following four- digits:

COMPONENT TYPE

COMPONENT ID #

 

 

Satellite

0

 

 

TV

1

 

 

VCR/DVD/PVR

2

 

 

Stereo

3

5.Press PWR, or other functions (e.g. PLAY for VCR) you want to use.

6.Point the remote at the TV or component and press CHANS. Repeatedly press CHANSuntil the TV or component turns off or performs the action you selected in step 5.

NOTE: Every time CHANSis pressed the remote advances to the next code and power is trans- mitted to the component.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Directv Contents Introduction Press TV Input to select the available inputs on your TV Features and FunctionsKey Charts Press PWR to turn the selected component on or offUse the Arrow keys to move around Press this key… To… Installing Batteries Setting Up Your Directv RemoteOnscreen Remote Setup Controlling Your TVSetting UP the TV Input KEY Deactivating the TV Input Select KeySearching for TV, AV1 or AV2 Codes Locking Volume to AV1, AV2 or TV Changing Volume LockVerifying the Codes Activating the RF Transmitter Deactivating the RF TransmitterTroubleshooting Press and release CHANT. The green light flashes twiceSetup Codes for Directv Receivers Directv Setup CodesSetup Codes for Directv HD Receivers Setup Codes for TVs Setup CODES, Other DevicesSetup Codes for Directv DVRs DWD496RGBPL AOCCCE CXC ESA HCMJBL ICEIRT JCBMAG KTVLXI MEINEC MTCNAD NTCPetters 11523 Philco Panama 10264 Penney10018, 10003 PhilipsSBR RCARBM SEGSSS SEISKY SVATVS TMKVeos Setup Codes for TVs DLP Setup Codes for TVs PlasmaSylvania 11271 Tatung 1073111423 1175611962 Setup Codes for TV/DVD Combos11963 11948, 11958Setup Codes for TV/VCR Combos 21262 21479Funai 20000 Mitsubishi 20807 OptimusSetup Codes for VCRs ABSHI-Q Kodak 20035 IBUYPOWER 21972 Jensen 20041Kenwood 20067, 20041 Kioto 20348 Linksys 21972 Lloyds 20000 Logik 20072Pentax 20042, 20065 Philco 21162Optonica 20062 Orion 21818STS UECAMW Setup Codes for DVD PlayersBBK Cavs GPXJSI 20785 20692Nakamichi 21222 Naxa 21473 21457TYT 20880 Setup Codes for PVRsZoece 21265 ReplayTV 20614 Samsung 20739 Sharp 21875Setup Codes for Audio Receivers ADCMCS Penney 30195 Philco 31390, 31562 Philips Orient Power 30744 Oritron 31366 Panasonic31074 31283, 31365Setup Codes for Audio Amplifiers 30331 30264Repair or Replacement Policy Additional InformationFCC Authorization Label Responsible Party

RC64 specifications

The DirecTV RC64 is a versatile remote control designed for DirecTV satellite television systems, providing an enhanced user experience for viewers. It is equipped with a range of features and technologies that make it easy to navigate and control DirecTV’s extensive channel offerings.

One of the key characteristics of the RC64 remote is its user-friendly interface. The design is optimized for comfort and efficiency, featuring a layout that allows for quick access to commonly used buttons. The remote includes a large, easy-to-read keypad, which helps users switch between channels with minimal effort. Its ergonomic design fits comfortably in the hand, making it suitable for prolonged viewing sessions.

The RC64 remote also showcases advanced technology with its Universal Remote capabilities. It can be programmed to control various other devices, such as TVs, audio systems, and DVD players, allowing users to consolidate their remotes into one device. This Universal feature is particularly appealing as it simplifies the user experience and reduces clutter.

Another standout feature is the remote's built-in coded search function. This allows users to easily sync their remote control with different equipment, eliminating the need for multiple remotes. With just a few button presses, users can set up the remote to control compatible devices seamlessly, enhancing convenience.

The RC64 remote is also equipped with dedicated buttons for quick access to popular features, including channel guide, DVR recording, and interactive applications. This ensures that users can find their favorite programs and content without navigating through complex menus, enhancing the overall viewing experience.

Moreover, the remote is designed to operate over a reliable IR (infrared) communication technology, providing a stable connection to the receiver. This ensures that users can control their DirecTV services from various angles and distances within the room.

The DirecTV RC64 remote is a robust device that combines functionality, comfort, and ease of use. With its universal control capabilities, advanced programming features, and dedicated access buttons, it represents an essential tool for any DirecTV subscriber, allowing them to enjoy their favorite television content with minimal hassle.
Top Page Image Contents