Sanus Systems JFBD1 manual Attach Top Backboard to JFV65

Step 3: Attach Top Backboard to JFV65

CAUTION

The Top Backboard (A) is heavy. To avoid injury or product damage, two people must lift the Backboard.

Position the Top Backboard (A) on the Bottom Backboard (B). Make sure the dowels on the Top Backboard fit into the holes on the Bottom Backboard. Push the Backboards together so there is no gap between them.

Use eight ¼-20 x 0.5″ Screws (E) and eight ¼″ Lock Washers (F) to fasten the Top Backboard to the Backboard Joining Plates (C), and the Mounting Rails as shown in Figure 4. Make sure all twenty-four of the ¼-20 x 0.5″ Screws are tight.

Lock

Washer (F)

Screw (E)

Top

Backboard

(A)

Backboard

Joining Plate

(C)

Bottom

Backboard

(B)

Figure 4

Lock

Washer (F)

Screw (E)