Sanyo DP32670 To connect the TV to a PC Personal Computer, Rgb, Resolution Aspect Ratio, KHz

Press the INPUT SELECT on your Remote Control to step through signal inputs to select PC.

Press the SETUP/TV MENU to display the TV’s PC Setup Menu. Select Auto Adjustment.

Insert one end of a Stereo Mini-Audio cable into the PC Audio Out jack and the other end into the TV PC/HDMI AUDIO Input jack. (Stereo Mini- Audio Cable not supplied.)

Connections to other equipment

To connect the TV to a PC (Personal Computer)

NOTE: Before connecting any cables, disconnect the AC Power Cords of both the TV and Personal Computer from the AC outlets.

1 Connect an RGB cable from the monitor output (a) on your PC to the RGB connector on the TV and tighten the screws. (Monitor Cable not supplied.)

NOTE:

If Computer has only DVI Output (b), a DVI to RGB converter will be required (converter not included).

2

HINT:

Volume can be adjusted both from the PC and the TV VOL +/–.

3

4

(a)(b)

RGB DVI JACK

Rear of the unit

VGA cable (not supplied)

Audio cord (not supplied)

ENGLISH

NOTE:

Power on the TV and any other peripheral equipment before powering on the computer.

NOTE:

• Save and close all documents, in case computer might need to be restarted.

• Before connecting your computer to your TV, please refer to the following chart to set to a compatible resolution.

• A Refresh Rate value of 60 Hz on your computer is recommended for your TV.

RESOLUTION	ASPECT RATIO	REFRESH RATE	HORIZONTAL	VERTICAL
		(Hz)	FREQUENCY	FREQUENCY (Hz)
			(kHz)
640 x 480	4:3	60	31.47	59.94
		72	37.86	72.81
		75	37.50	75.00
720 x 400	18:10	70	31.47	70.00
		56	35.16	56.25
800 x 600	4:3	60	37.88	60.32
		72	48.08	72.19
		75	46.88	75.00
1024 x 768	4:3	60	48.36	60.00
1280 x 768	15:9	60	47.78	59.87
1280 x 720	16:9	60	45.00	60.00
1360 x 768	16:9	60	47.71	60.00

37

54H0521A_eng.indd 37

3/17/10 4:28:08 PM