MULTICHANNEL TV SOUND INDICATOR (MTS)
Appears
•One or both of the indicators will light, depending on the MTS broadcast.
TV screen |
|
| STEREO |
CH 4 |
|
| Lights up when a stereo broadcast is |
|
| being received. | |
STEREO/SAP |
|
| |
|
| SAP | |
|
|
| |
|
|
| Lights up when a SAP BILINGUAL |
|
|
| broadcast is being received. |
|
|
|
|
If only STEREO appears on the TV screen.
The VCR can record in stereo onto the VHS
If only SAP appears on the TV screen.
Set BROADCAST TYPE to SAP.
If both STEREO and SAP appear on the TV screen
Use BROADCAST TYPE to select the desired recording mode (STEREO or SAP).
SAP (Second Audio Program) RECORDING
Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP.
1Insert a video cassette with the safety tab in place.
2Set BROADCAST TYPE to SAP (SETUP menu).
Do this if only the SAP appears on the TV screen or you know the program will use the SAP.
3Press MENU when finished.
4Set the desired speed (SP or SLP) by pressing SP/SLP.
5Select the desired channel. The SAP should appear on the TV screen.
6Press REC once
Recording of the program you are viewing on the TV starts.
7Press STOP to stop recording.
TAPE COUNTER MEMORY FEATURE
REAL-TIME COUNTER
Shows tape length in hours, minutes, and seconds as illustrated below. Press CLK/COUNT to select the real- time counter display.
Every press of CLK/COUNT changes the item as illus- trated below.
•Counter changes to 0:00:00 when the cassette is ejected.
•The
•The
COUNTER MEMORY FUNCTION
This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.
1Begin recording or playing a tape.
2Press CLK/COUNT repeatedly to display the
3At the point that you want to locate later, reset the
4Continue to play or record.
5Press STOP when recording or playback finishes.
6Press REW.
The tape automatically stops when the tape counter returns to about “0:00:00”.
TAPE REMAINING
This function allows the time of the remaining tape to be displayed during recording or playback.
Press CLK/COUNT until the REM indicator appears on the TV screen during recording or playback.
NOTE
The remaining tape length indicator may not be displayed correctly depending on the condition and type of tape and the kind of the tape
EDITING A RECORDING
1Press PLAY and watch the program until you reach the exact point where you want the new recording to start.
2Press PAUSE.
3Press REC once.
The program material to be recorded will appear on the tele- vision.
4When you wish to start recording, press PAUSE again.
The new program material will directly follow the previously recorded material. This feature is especially helpful for dub- bing from the camcorder to the VCR and making various seg- ments of a recording into a continuous program.
OPERATING HINTS
•In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the VCR automatically starts rewinding at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the VCR will turn itself off.
•After you have finished using the VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.
•Be sure the VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television to the VCR chan- nel (3 or 4) and pressing the TV/VCR selector to turn the VCR indicator on.
•Do not attempt to hook up more than one television set to the VCR for either recording or playback.
14