Sanyo LCD-47XR8DA Manual Searching for ATV programs, Manual Fine Tuning, Setting Audio System

Memorizing the Channels (Continued)

Manual Searching for ATV programs

If desired analog programs cannot be searched by Auto Tuning, you can make use of ATV Manual Tuning to search programs manually.

1	In Channel menu, press 6or5 to select ATV Manual Tuning
	item, then press4or OK to access.
2	Highlight Storage To item, press 3or4button to select a channel
	position in which you want to store.
3	Use 6or5 to select Search item, press 3or4to begin the
	manual ATV channel search.

	Press 4, the unit searches towards higher frequency;
	Press 3, the unit searches towards lower frequency.
4	The search stops when a program is found and this program will be
	stored in current channel, then press the RED button to save. During
	the process, If you want to stop the search , please press EXIT button.

Manual Fine Tuning

Fine Tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound effect, use Fine Tune.

1 Navigate to ATV Manual Tuning submenu, highlight Current

	CH item, press 3or4to select a channel you want to perform fine
	tune.
2	Press 6 to select Fine-Tuneitem, and then use 3or4 button to
	fine tune until the best possible picture and sound are obtained.
3	During the process, press EXIT to exit, and RED button to save
	the effect.

Note

=Fine Tune is only for analog TV program.

Picture	Sound	Time	Option	Lock	Channel
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
	Select		Move	Menu	Exit

ATV Manual Tuning
Storage To			1
Color System			PAL
Audio System			BG
Current CH			1
Search
Fine-Tune
Frequency		445.25 MHz
Exit	SAVE		Select

ATV Manual Tuning
Storage To			1
Color System			PAL
Audio System			BG
Current CH			1
Search
Fine-Tune
Frequency		445.25 MHz
Exit	SAVE		Select

Setting Audio System

Normally it is unnecessary to set audio system. However, if abnormal sound occurs, you may try to adjust the audio system.

1	Navigate to ATV Manual Tuning submenu, press 5or6 to
	highlight the Audio System item.
2	Press 3or4 to select the proper audio system. Press RED button
	to save.

3	Press MENU to return to previous menu. Press EXIT to exit the
	menu screen directly.

ATV Manual Tuning
Storage To			1
Color System			PAL
Audio System			BG
Current CH			1
Search
Fine-Tune
Frequency		445.25 MHz
Exit	SAVE		Select

16