Sanyo LCD-19XR9DA Troubleshooting, Remote control does not operate, Double images

Page 35

Troubleshooting

If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area.

Before calling service, please check the symptoms and follow suggested solutions.

Remote Control

Problem

Remote control does not operate

Possible Solutions

!The batteries could be weak. Replace the batteries.

!Check the orientation of the batteries.

!Make sure the power cord is plugged in.

Video and Audio

Problem

Possible Solutions

No picture (screen not lit), No sound

!Make sure the power cord is plugged in.

!Press POWER on the TV or on the remote control.

!Try another channel; it could be station trouble.

Dark, poor or no picture (Screen lit), good sound

!Select a proper picture mode.

!Adjust the brightness in the video setting.

!Check the antenna connections.

	No color/dark picture/color	!	Adjust the color saturation in the video setting.
	is not correct	!	Adjust the color saturation in the video setting.
	is not correct

	Only snow and noise appear	!	Check the antenna connections.
	on the screen	!	Try another channel; it could be station trouble.

	Dotted lines or stripes	!	Adjust the antenna.
		! Move the TV away from noise sources such as cars, neon signs, or hair dryers.

	Double images	!	Using a highly directional outdoor antenna or a cable may solve the problem.

	Good picture, no sound	!	The sound may be muted. Press MUTE again to cancel.
		! Make sure the stereo mode is set to stereo or mono.

	Audio noise	!	Communication problems may occur if infrared communication equipment (e.g.,
			infrared cordless headphones) is used near the TV. Move the infrared
			communication equipment away from the TV until the noise is eliminated.

32

Image 35

Contents LCD TV Important Information Table of Contents Important Safety Precautions Important Safety Precautions Do not use in hot and cold rooms locations To clean this unit, wipe with a soft, dry clothImportant Notice Preparations Using the Remote ControlInstalling the Batteries Insert the AC plug into a conveniently located AC outlet Power ConnectionAntenna Connection VOL+ Identification of ControlsMain Unit CH+AV inputs Video, Audio L, R Hdmi interface SUB inputPdif digital audio out terminal coaxial Component inputsRemote Control Unit Connections Connecting a CamcorderConnecting Digital Coaxial Audio How to connectTo play component video from an external device Connecting Component VideoConnecting a Computer To connect a device using component videoTo play from the device using Hdmi Connecting an Hdmi deviceConnecting a VCR for Recording How to connect a device using Hdmi ConnectionTo navigate through the OSD main menu Basic OperationsMain Menu Overview List of main menus to help you with operationsTurning Off Turning On/Off the PowerFirst Time Setup Turning OnPress 3,4or OK to confirm the selection Selecting the Input Signal SourceDisplaying the Information Banner Manual Searching for DTV programs Memorizing the ChannelsAuto Channel Search Manual Searching for ATV programs Manual Fine TuningSetting Audio System Open the Programme Edit menu Setting Favorite ChannelsLabeling Channels To delete channels Channel List ManagementTo skip unnecessary channels To sort channelsChannel and Program Selection Customizing the Picture Picture AdjustmentUsing the volume buttons VOL+ and VOL Sound AdjustmentAdjusting the Volume Adjusting the SoundIGR German stereo system Broadcasts Stereo/Bilingual Selection for analog channelsAudio Track Selection for digital channels Nicam Broadcast SelectionHearing Impaired System SetupSystem Setup System Update TimeTo create a new password Rating and Lock SetupPassword Setup Block Program SetupRestoring Factory Default Parental Guidance Setup DTV onlyLock Tuning Setup Time Zone Selection Timer SetupCurrent Time Setup On Timer SetupAuto Sleep Setup Off Timer SetupSleep Timer Setup Press Yellow button again to exit EPG OperationOpereation Program’s information will be displayedSubtitle Teletext & SubtitleTeletext Such as position and phase Screen Setup for D-SUBPC ModeScreen Setup Auto adjustHotel Mode Hotel Mode SetupHotel Mode Setup Double images TroubleshootingRemote control does not operate Select them with 0-9 number buttons Current input modeOne or some channels can’t be Displayed SectionLCD TV SpecificationsAssembling the stand and removing the stand columnOption Installing the StandAdjusting the viewing angle of the TV Detaching the stand column Detaching the Stand5944035480 Ver