Sanyo LCD-22XR9DA One or some channels can’t be, Displayed Section, Current input mode

Page 36

Troubleshooting

General

Problem	Possible Solutions
One or some channels can’t be	! These channels may be locked. Please unlock them (see <Rating and Lock Setup>
displayed	section).
	! These channels may be set skipped in the channel list. You may set it to not skipped or
	select them with 0-9 number buttons.

Lost password	! You may use the super password (2580).

Some items can’t be accessed	! If a setting option appears in gray, this indicates that the settings option is unavailable
	in current input mode.

TV cabinet creaks	! When the TV is in use, there is a natural rise in temperature, causing the cabinet to
	expand or contract and may be accompanied by a slight creaking noise. This is not a
	malfunction.

Some settings (such as volume setting, etc.)may not be memorized when the TV loses power or you press main Power Switch to turn off the TV.

!After you make some settings or adjustments, and within 30 seconds you turn off the TV by main Power Switch or the TV loses power, then the settings you have made within 30 seconds may not be memorized. But you can use Power button to switch the TV to standby mode before cutting off the power, then the settings can be memorized.

Control buttons do not operate	! Disconnect the power cord and wait for a few seconds. Then re-plug the power cord
	and turn on the unit again.

Note

If your problem is not solved, turn your unit off and then on again.

Cautions:

Never attempt to repair a defective TV yourself.

33

Image 36

Contents LCD TV Important Information Table of Contents Important Safety Precautions Important Safety Precautions To clean this unit, wipe with a soft, dry cloth Important NoticeDo not use in hot and cold rooms locations Using the Remote Control Installing the BatteriesPreparations Power Connection Antenna ConnectionInsert the AC plug into a conveniently located AC outlet Identification of Controls Main UnitCH+ VOL+Hdmi interface SUB input Pdif digital audio out terminal coaxialComponent inputs AV inputs Video, Audio L, RRemote Control Unit Connecting a Camcorder Connecting Digital Coaxial AudioHow to connect ConnectionsConnecting Component Video Connecting a ComputerTo connect a device using component video To play component video from an external deviceConnecting an Hdmi device Connecting a VCR for RecordingHow to connect a device using Hdmi Connection To play from the device using HdmiBasic Operations Main Menu OverviewList of main menus to help you with operations To navigate through the OSD main menuTurning On/Off the Power First Time SetupTurning On Turning OffSelecting the Input Signal Source Displaying the Information BannerPress 3,4or OK to confirm the selection Memorizing the Channels Auto Channel SearchManual Searching for DTV programs Manual Fine Tuning Setting Audio SystemManual Searching for ATV programs Setting Favorite Channels Labeling ChannelsOpen the Programme Edit menu Channel List Management To skip unnecessary channelsTo sort channels To delete channelsChannel and Program Selection Picture Adjustment Customizing the PictureSound Adjustment Adjusting the VolumeAdjusting the Sound Using the volume buttons VOL+ and VOLStereo/Bilingual Selection for analog channels Audio Track Selection for digital channelsNicam Broadcast Selection IGR German stereo system BroadcastsSystem Setup System SetupSystem Update Time Hearing ImpairedRating and Lock Setup Password SetupBlock Program Setup To create a new passwordParental Guidance Setup DTV only Lock Tuning SetupRestoring Factory Default Timer Setup Current Time SetupOn Timer Setup Time Zone SelectionOff Timer Setup Sleep Timer SetupAuto Sleep Setup EPG Operation OperationProgram’s information will be displayed Press Yellow button again to exitTeletext & Subtitle TeletextSubtitle Screen Setup for D-SUBPC Mode Screen SetupAuto adjust Such as position and phaseHotel Mode Setup Hotel Mode SetupHotel Mode Troubleshooting Remote control does not operateDouble images Current input mode One or some channels can’t beDisplayed Section Select them with 0-9 number buttonsSpecifications LCD TVInstalling the Stand Adjusting the viewing angle of the TVAssembling the stand and removing the stand columnOption Detaching the Stand Detaching the stand column59440 Ver