Sanyo LCD-37CA9S, LCD-32CA9S, LCD-42CA9S owner manual OFF Timer, PIP Operation

BASIC OPERATION

OFF TIMER

To set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on the screen for a short while.

To select "0 min", "30 min", "60 min", "90 min" or "120 min" with TIMER buttons.

PIP OPERATION

Using PIP function, you can enjoy a TV program and an image such as DVD input from a rear terminal at

the same time.
1	Press PIP button to display sub picture.
2	Each time PIP button is pressed, the location of sub picture is changed as follows.
3	During PIP mode, pressing the MAIN/SUB button will switch main and sub picture.
	The sound on the main picture and the sub-picture also changes at the same time.
4	Press CHANGE button in PIP mode can switch input source in Sub picture. (Refer to this page "PIP
	Combination".
5	Press PIP button or POWER ON/OFF button to exit PIP mode.
	Sub Picture	Main Picture

Note: The controls belongs to the picture which is TV input in PIP mode. Otherwise, it belongs to the main picture.

Combination of the Main-picture and Sub-picture

The following combination (Main and Sub picture) in the PIP mode, "" indicates that it is possible for combination, and "X" indications that it is impossible for combination.

Note: DVD input terminal should be connected so that AV2-DVD in the following table can be combined with TV or AV1-S, otherwise it cannot be combined with TV or AV1-S.

MAIN	PC	HDMI 2	HDMI 1	TV	AV1-S AV2-DVD
SUB
PC	X
HDMI 2		X	X
HDMI 1		X	X
TV				X	X
AV1-S				X	X
AV2-DVD					X

Downloaded20 From TV-Manual.com Manuals