Insert:
Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navi- gation buttons move the selected programme to the decided programme space and press the GREEN but- ton again.
Delete:
To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the se- lected programme from the programme list, and the programmes below shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto Pro- gramming System Menu will appear on the Screen.
Auto Program
Country
WARNING!
All Prestored Programs
will be deleted
APS is running...
UK | 63.75 | MHz |
|
| 6% |
P 03 - C 04 | 63.75 | MHz |
Cancel
Whenever you press the “BLUE” button, A.P.S. func- tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is displayed with the programmes found and located.
Program
By pressing / button, select Program. Press “” / “ button to select the program number. You
can also enter a number via digit buttons on the re- mote control. There are 100 program storage between 0 and 99.
UK
Ok
Cancel
Band
Band can be selected either “C” or “S” by press“” / “ button.
A.P.S. (Auto Programming System) Country
Press / button to select your country. If you want to exit from A.P.S. function, press the “BLUE” button.
When you press OK or RED button for starting APS, all stored programs will be erased and the following screen will be displayed:
Channel
Channel can be changed by “” / “ ” button or Digit Buttons.
Colour System
By pressing / button, select Colour System.
Press “” / “ ” button to change the colour system to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not available for the Colour System.
Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well.
Sound System
By pressing / button, select Sound System. Press “” / “ ” button to change the sound system to BG, I, L, L’, DK.
Fine Tune
By pressing / button, select Fine Tune. Press “” / “ ” button to adjust the tuning.
English - 9 -