Sanyo DP19647 Menu OPTION-CHANNEL Scan Memory, Deleting Analog or Digital Channels from Memory

MENU OPTION—CHANNEL SCAN MEMORY

DELETING ANALOG OR DIGITAL CHANNELS FROM MEMORY

Channel Scan Memory is a list of active channels that you can scan through using the Channel Scan CH ▲ (up) CH ▼ (down) keys. This list can be customized by delet- ing and/or adding channels.

1 Press the MENU key to display the Main menu.

2 Use the CURSOR ▲▼ keys to highlight Channel Scan Memory. Press ENTER.

3 Use the CHANNEL (CH ▲▼) keys or numerical 0 ~ 9 keys to select desired channel.

4 Press the ENTER key to delete the channel. The display will change to “deleted.”

After 3 seconds the TV screen will display “Add?”

OPERATING TIPS:

■When a digital channel is deleted, all of that channel’s sub-channels are deleted as well.

■Only previously deleted digital channels can be added back to the Channel Scan Memory.

HELP HINTS (PROBLEMS/SOLUTIONS)

SYMPTOM	CHECK THESE CONDITIONS	TRY THESE SOLUTIONS
Cannot select or scan some	● Channels may be removed from	● Select Channel Scan memory and
channels.	memory.	manually add channels or start an
	● Check antenna connections.	“All Channel Search.”

● NO digital signal being broadcast.

● Weak Signal.	● Turn antenna, install signal
	booster.
● V-Guide is set to block program-
	● Set V-Guide to “Off” or press
ming.
	RESET key to clear all settings and
	restart channel search.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!

33