Connecting the LCD TV to a PC

Using the Cable Holder

You can use the supplied cable holder as the following:

•Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above.

•Place cables into the cable holder after all necessary connections are made.

Using Digital Multimedia

Connectors

•You can connect USB devices to your TV by using the USB inputs of the TV. This feature allows you to display/play JPG, MP3 and video ﬁles stored in a USB stick.

•It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV.

•You may back up your ﬁles before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any ﬁle damage or data loss.

•Do not pull out USB module while playing a ﬁle.

CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself.

SIDE VIEW USB MEMORY

USB

5Vdc

Max:500mA

For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. Power off both computer and display before making any connections. Use 15-pin D-sub display cable to connect a PC to the LCD TV. When the connection is made, switch to PC source. See “Input selection” section. Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts.

	Audio	PC Input
	Inputs	PC Input
	Inputs
	PC audio cable	PC RGB cable
	(not supplied)	(not supplied)
	to AUDIO INPUTS	to PC input
	on the TV

Using Side AV Connectors

You can connect a range of optional equipment to your LCD TV using side connectors of the TV.

•For connecting a camcorder or camera , you should use AV socket (side). To do this, you must use the supplied video/audio connection cable. First, plug single jack of the cable to the TV’s AV IN socket (side). Afterwards, insert your camera cable’s (not supplied) connectors into the plural part of the video/ audio connection cable. Colours of the connected jacks should match. See illustration below.

•Afterwards, you should switch to Side AV source. See the section Input selection in the following sections for more information.

AV Connection	AV Cable
Cable (supplied)	(not supplied)

USB Memory Connection

IMPORTANT: The TV should be switched off while plugging or unplugging a USB device. Plug your USB devices to the USB input of the TV. You can connect a usb device to your TV by using the USB

SIDE AV

Headphone

Camera

input of the TV.

Note: It is possible certain types of hard disk drives

are not supported.

English

•To listen the TV sound from headphones, you should connect headphones to your TV by using the HEADPHONE jack as illustrated above.

-10 -