Memorizing the Channels (continued)
Manual Fine Tuning
1 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
2 Press CH+/- repeatedly to select Fine Tune item.
3 Press VOL+/- to fine tune till the best possible picture and sound are obtained.
If you fine tune a program manually, the AFC will be turned off automatically.
Adding and Erasing Channels
1 Use number buttons to directly select a channel that will be added or erased.
2 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
3 Press CH+/- repeatedly to select Channel Skip item. 4 Press ENTER or VOL+/- to select On or Off.
Channel
Auto Searching | Cable |
|
Source | Off | |
Channel Skip | On | |
Fine Tune | On | Off |
AFC | ||
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
Channel
Auto Searching | Cable |
|
Source | Off | |
Channel Skip | On | |
Fine Tune | On | Off |
AFC | ||
Frequency | 55.25 MHz |
|
Move | Select | Menu to exit |
When the item is set to on, the selected channel will be erased. When the item is set to off, the selected channel will be added.
The erased channels can not be selected by using the CH+/- buttons unless you use number buttons to input channel number directly.
16