Memorizing the Channels

Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are memorized, use CH+/- to scan the channels.

Selecting the Signal Source

Before your LCD TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system)

1 Press MENU to display the menu main page.

2 Press CH+/- repeatedly to select Channel page.

3 Press ENTER or VOL+/- to access the submenu.

4 Press CH+/- to select Source item.

5 Press ENTER or VOL+/- to toggle between Antenna or Cable.

If you are connected to an antenna, please select Antenna. If you connect cable, please select cable.

Storing Channels in Memory Automatically

1 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.

The Auto Searching item will be highlighted automatically.

2 Press ENTER or VOL+/- to store channels in memory automatically.

The unit will begin memorizing all the available channels. During the process of the Auto Search, you can press Menu to exit.

Channel

Auto Searching
Source	Cable
Channel Skip	On	Off
Fine Tune
AFC	On	Off
Frequency	55.25 MHz
Move	Select	Menu to exit

Channel

Auto Searching
Source	Cable
Channel Skip	On	Off
Fine Tune
AFC	On	Off
Frequency	55.25 MHz
Move	Select	Menu to exit

Channel

Auto Searching
Source	Cable
Channel Skip	On	Off
Fine Tune
AFC	On	Off
Frequency	55.25 MHz
Move	Select	Menu to exit

Auto Searching

CH No 11

Menu to exit

Setting Auto Frequency Control (AFC)

1 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.

2 Press CH+/- repeatedly to select AFC item.

3 Press ENTER or VOL+/- to select On or Off.

When the AFC is set to On, the unit will automatically tune the program frequency to provide the best possible picture and sound.

Channel

Auto Searching
Source	Cable
Channel Skip	On	Off
Fine Tune
AFC	On	Off
Frequency	55.25 MHz
Move	Select	Menu to exit