Sanyo 21VF1K Connecting to the Front AV2 Input Jacks, Connecting to the Monitor Output Jacks

Connecting Other Equipment

Connecting to the Front AV2 Input Jacks

Input (AV2)	Input-L (AV2)	Input-R (AV2)
To Video	To Audio	To Audio

Note: For monaural model TV there is no L/R audio input terminals. If the video player is stereo, connect the Left (L) audio output terminal from video player to audio input terminal on the monaural TV set (more details see your video player manual book).

It is convenient to use the AV input jack on the front panel for equipment that is often connected and disconnected.

■ To watch the Front AV2 video

input picture, select AV2	AV2
position by pressing the TV/AV
Selector.

Video/DVD Player

Connecting to the Monitor Output Jacks

	INPUT	MONITOR OUT
AV1/DVD
CR	R	R
	(MONO)		To Audio Output-R
CB	L	L
			To Audio Output-L
Y		V
		I
	VIDEO	D	To Video Output
		E
		O

To video and audio inputs

VCR for Recording

The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dub- bing from AV1 or AV2 input terminals.

■To record TV programme, select TV mode by pressing the TV/AV Selector and record the desired programme.

15 TV mode

■To dub video from the AV1 terminal input, select AV1 position and by pressing the TV/AV Selector.

AV1

AV Connection To the Aerial Socket

The AV apparatus can also be connected to the aerial socket of your TV receiver.

Presetting to watch the video input

PLAYBACK

1.Playback the VCR .

2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and		VCR for
Manual Tuning on pages 11.)
	Aerial Socket	playback

For further details concerning this connection and adjustment, refer to the operating instructions for the AV equipment.

16