Sanyo DVD-DX501 instruction manual Audio, Dual Mono, Dynamic Range

1005DVD-DX501 2005.10.5 5:37 PM ˘ ` 34

FUNCTION SETTING

AUDIO

Digital Out

•OFF

No signal is output from the coaxial, optical port.

•Bitstream

Select this when the DVD player is connected with a power amplifier through optical or coaxial port. Please refer to the page 14. when a Dolby Digital DVD, DTS DVD or MPEG DVD is played, select this, the coaxial or optical port will output in the corresponding digital format (source code). The power amplifier to be connected must have Dolby Digital, DTS and MPEG DVD is played, the optical or coaxial port will output in PCM 2-channel format.

•LPCM

Select this when the DVD player is connected with a TV or a power amplifier through audio cord.

Down Mix

Select Down Mix mode to LT/RT or Stereo

DUAL MONO

This is the output mode of the L and R signals of the set audio output. If it is set to "MIX MONO", the function only works when the DVD being played is 2.0-channel.

•STEREO

Choose this option, the audio output should be dummy stereo signal.

•L-MONO

•R-MONO

•MIX-MONO

DYNAMIC RANGE

Set "Off" to view a program in the dynamic range as recorded in disc. To hear loud sound softer and soft sound louder, set "Full".

–– FULL

––

–– 3/4

––

–– 1/2

––

–– 1/4

––

–– OFF

34