Avenview DVI-VIDEOWALL-4 specifications Installation

Page 7

Section 2: Installation

Follow these instructions for installation of DVI-VIDEOWALL-4:

1.Mount or fix the DVI-VIDEOWALL-4 safely

2.While DVI-VIDEOWALL-4 switched off, connect monitors/projectors or other DVI displays by using 1 male to male high quality DVI cable to DVI-VIDEOWALL-4

3.Plug-in DVI to DVI/VGA Y cable to DVI-IN

4.Plug-in VGA to Component Adapter to VGA connector of the Y cable

5.Connect a device equipped with DVI output (such as PC) to DVI connector of the Y cable

6.Connect a device with VGA output (such as laptop) to VGA connector of DVI-VIDEOWALL-4

7.Connected a device with Composite video output to composite input of DVI-VIDEOWALL-4

8.Turn ON DVI-VIDEOWALL-4

9.Turn ON all connected devices and then control the display output thru RS232 and included software

Connection Diagram

 

www.avenview.com

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Display Video Wall Processor Table of Contents Regulatory Notices Federal Communications Commission FCC Important SafeguardsSafety Instructions Getting StartedIntroduction Device Features Package Contents2 I/O Connectors Before InstallationInstallation System Requirements Software Installation and SetupSoftware Connection Page File Software OperationBackground Sub MainBorder Control-Setting DialogOnly 15 English characters can be displayed at most Color ImageZoom Pattern Edid Code HS / VS DelayTotal & Y Total Control Display LayoutStart, X End, Y Start, Y End Enable All, Disable All, Default LayoutCascading Multiple Devices Specifications Specifications and Supported ResolutionsModel DVI-IN Supported Resolutions2 VGA DVI-OUT Poor Quality General TroubleshootingNo Power No or Distorted ImageDisclaimer
Top Page Image Contents