Sony HT-5500D, HT-6500DP, HT-1700D operating instructions 49US

Page 49

There is no sound from a specific component.

•Check that the component is connected correctly to the audio input jacks for that component.

•Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.

•Check that you have selected the correct component on the receiver.

There is no sound from one of the front speakers.

Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones (page 22).

If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component.

If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound.

The left and right sounds are unbalanced or reversed.

•Check that the speakers and components are connected correctly and securely.

•Adjust balance parameters in the LEVEL menu.

There is severe hum or noise.

•Check that the speakers and components are connected securely.

•Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light.

•Move your TV away from the audio components.

•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

There is no sound or only a very low-level sound is heard from the center or /and surround speaker.

•Make sure the sound field function is on (press MODE).

•Select a sound field containing the word “C.ST.EX” (pages 24–25).

•Adjust the speaker level (page 20).

•Make sure the center or/and surround speaker size parameter is set to either “SMALL” or “LARGE” (page 16).

There is no sound from the active sub woofer.

There is no sound output from the SUB WOOFER terminal depending on the sound field (page 55).

The surround effect cannot be obtained.

Make sure the sound field function is on (press MODE).

Dolby Digital or DTS multi channel sound is not reproduced.

•Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format.

•When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component.

Recording cannot be done.

•Check that the components are connected correctly.

•Select the source component with function button.

•Make sure that INPUT MODE is set to “ANALOG” (page 22) before recording from a digital component connected to the analog MD/TAPE terminal.

To connect an LD player via an RF demodulator.

Connect the LD player to the RF demodulator, then connect the RF demodulator’s optical or coaxial digital output to the receiver’s jack. When making this connection, be sure to set INPUT MODE manually (page 22). The receiver may not operate correctly if INPUT MODE is set to “AUTO IN”.

For details on DOLBY DIGITAL RF hookups, see the operating instructions supplied with your RF demodulator.

continued

Additional Information

49US

Page 48 Page 50
Image 49
Page 48 Page 50
Contents FM Stereo FM-AM Receiver 2US Table of Contents About This Manual Demonstration ModeFor RM-PP411 HT-6500DP and HT-5500D only For RM-U306 HT-1700D onlyMain unit How to use thisList of Button Cinema Studio EX A, B, CBefore you get started Required cordsHooking Up the Components Antenna hookupsMD or Tape deck Audio component hookupsCD player TV monitor Video component hookups10US Digital component hookupsTV tuner DVD player11US Multi channel input hookupsHT-6500DP and HT-5500D only AC power cord Connecting the AC power cordOther hookups 12US13US Speaker system hookupsTo avoid short-circuiting the speakers 14USTo avoid damaging your speakers Speaker system hookupMulti channel surround Setup Performing initial setup OperationsPerforming initial setup operations 15US16US Multi channel surround setupNormal Speaker and Micro Satellite Speaker Specifying the speaker parametersFront speaker distance L R Dist XX.X ft 17USCenter speaker distance C DIST. XX.X ft Surround speaker distance SL SR DIST. XX.X ftSurround speaker height SL SR 18USFront speaker size L R Center speaker size C 19USSurround speaker size SL SR Sub woofer selection SW S.WAdjusting the sound Adjusting the speaker level20US Listening to the subwoofer21US Checking the connectionsSelecting the component Multi Channel Decoding indicator HT-6500DP HT-5500D only22US Function buttonsChanging the display When the tuner is selected23US Basic OperationsSelecting a sound field Automatically decoding Input audio signal24US Enjoying movies with Cinema Studio EXSelecting other sound fields 25US26US Using only the frontSelecting a sound field To turn the surround effect off27US Understanding the multi channel surround displaysExample Enjoying Surround Sound Adjusting the level parameters Adjusting the surround parameterCustomizing sound fields 28US29US Resetting customized sound fields to the factory settings Adjusting the bass and treble30US Customizing sound fields31US Direct tuningPress the numeric buttons to enter the frequency Receiving BroadcastsPreset tuning Automatic tuningPresetting radio stations 32USScanning the preset stations Press Tuner Tuning to preset stationsUsing the preset codes 33USRecording Naming preset stations Program sources34US Recording on an audio tape or MiniDiscAdjustments using SET UP button Using the Sleep Timer35US Recording on a video tapeSelecting the command mode of the remote C.MODE.AVX Adjustments using the SET UP button2ch decode mode PRO Logic 36US37US Before you use your Remote Remote button DescriptionInserting batteries into the remote SleepRemote Button Description 38US39US Selecting the command mode Selecting the mode RemotePress 1 AV1 or 2 AV2 while pressing down USE Mode To check the mode of the remote41US Programming the remoteProgramming the remote 42USTo control a VCR 43USTo control a DVD player To control a TVRemote button Description Before you use your Remote44US HT-1700D only45US TuningDEC Tone Main46US To reset all the function buttons to their factory setting To reset a button to its factory settingChanging the factory 47USTroubleshooting Precautions48US 49US 50US Troubleshooting51US SpecificationsAmplifier section FM tuner section52US Specifications53US Supplied accessories54US Treble buttons55US Adjustable parameters for each sound field

HT-1700D, HT-6500DP, HT-5500D specifications

The Sony HT-5500D, HT-6500DP, and HT-1700D are three outstanding home theater systems designed to enhance your audio experience, offering a blend of performance, advanced technologies, and user-friendly features. Each model is tailored to meet various needs and preferences, appealing to both casual listeners and audiophiles alike.

Starting with the Sony HT-5500D, this 5.1 channel home theater system delivers an impressive 1000 watts of total power, ensuring a robust sound experience for movie nights or music playback. The system includes a powerful subwoofer that provides deep bass capable of bringing cinematic sound effects to life. One of its key features is the inclusion of Dolby Digital technology, which creates an immersive surround sound environment, making users feel as if they are part of the action. Additionally, the HT-5500D supports HDMI inputs, allowing seamless connectivity to various devices such as Blu-ray players and gaming consoles, while also featuring Bluetooth streaming for easy wireless audio playback.

The Sony HT-6500DP builds upon the core elements of the HT-5500D, adding even more functionality and performance. This 5.1 channel system boasts a higher total power output, reaching up to 1200 watts, thus delivering a more dynamic audio experience. The HT-6500DP enhances its surround sound capabilities with technologies like Dolby Pro Logic II, ensuring crystal-clear dialogue and rich audio effects in any setting. The system also features multiple HDMI inputs, optical audio inputs, and USB ports for greater versatility in connecting digital media devices. A standout feature of the HT-6500DP is its built-in audio processing, allowing users to enjoy their favorite music in various surround modes, enriching the overall listening experience.

Finally, the Sony HT-1700D is designed for users seeking a compact yet powerful solution for their home entertainment needs. Offering 600 watts of power, this system strikes a balance between performance and space efficiency. It features a streamlined 5.1 channel setup, delivering impressive audio quality without overwhelming your living space. The HT-1700D also focuses on ease of use, equipped with intuitive controls and straightforward setup procedures. Additionally, it incorporates Bluetooth connectivity for wireless streaming and can easily connect to gaming consoles, televisions, and music players.

In summary, whether it is the powerful HT-5500D, the versatile HT-6500DP, or the compact HT-1700D, Sony offers a range of home theater systems designed to elevate the audio experience. Each model comes packed with features aimed at enhancing sound quality, connectivity, and user experience, catering to diverse preferences and needs within the realm of home entertainment.
Top Page Image Contents