1.8Installation
To setup Avenview
1.Power off display source such as DVD Player,
2.Connect your HDMI and/or DVI source to HDMI input and/or DVI input
3.Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack
4.Connect VGA/Component Y cable to
5.Connect other end of VGA/Component Y cable to VGA or Component input of display
6.Plug in 5V DC power cord to power jack of
7.Power on
8.Power on HDMI and/or DVI source and display with VGA or Component input.
S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF receiver must be able to recognize the input S/PDIF format.
This version does NOT support 8 Channel analog audio applications
S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only supports 48 KHz audio sample rate.
www.avenview.com | 6 |
|
|