Cobalt Networks 9034-SD owner manual Remote Control, DashBoard Control System Software

Remote Control

In This Chapter

This section provides a detailed explanation on using remote control functions with your card.

DashBoard Control System Software

The DashBoard Control System enables you to monitor and control openGearTM frames and controller cards from a computer. The DashBoard software and manual can be downloaded from the Cobalt Digital Inc. website (www.cobaltdigital.com).

Using the Menus and Menu Descriptions

You must first install the DashBoard Control System software on your computer. Refer to the DashBoard User Manual for software installation procedures and for using the DashBoard interface.

The following pages list the parameters from the menu tabs available in the DashBoard software when connected to a 9034-SD.

Menu	Item	Format	Description
	Product	CDI-9034-SD	The product name
	Manufacturer	Cobalt Digital Inc.	The manufacturer of the
			product
	Software Release	###	The release number of the
	Number		firmware in this card
	Software Build	###	The internal build number
	Date		of this software
Card Info	Software Build	###	The date and time the
	Time		software was created
(Read-only)
	+12 V Power Rail	#.## W	Positive Supply Power
	-7.5 Power Rail	#.## W	Negative Supply Power
	Video Input	############	Detected Video Standard
	Standard		on SDI or Analog Input
	Reference Standard	############	Detected standard of
			selected reference.
	SSN	############	Displays the Silicon Serial
			Number of the card.

9034-SD Owner’s Manual • (V 2.0) Page 19 of 28