6-5. Manual Installation
If you do not see the Installation Guide above, you need to do channel scan by pressing Menu button, then go to Scan > Auto Scan, and press OK to start channel scan. Channel scanning will take several minutes.
Please wait until the “Finish” dialog box shows. After it is done, exit from the menu and you are now ready to watch the programs.
Use 
/
keys on the remote to change channels.
7. Basic Operation (Remote Control)
While viewing TV or Radio channels, various functions can be performed using your remote control. Following is an explanation of the buttons on your Remote Control and the corresponding functions:
A.Power:
Turns the receiver ON/OFF.
B.Mute:
Mutes audio output of the receiver.
C.Numeric
Change the channel directly by pressing the channel number.
12