Panel Description
Front Panel
1
2
3
1.S/PDFI IN - 2Ch digital S/PDIF audio input
2.STEREO IN - 2Ch analog audio input
3.
Back Panel
1
0
7
2
6
3
4
5
1
2
3
4
5
1.HDMI OUT - Connect to an HDMI display
2.Status LED - Illuminates when passing signal to a display. Blinks when learning EDID
3.Mode dial - Switches between switcher modes and EDIDs
0:Selects audio from the Stereo audio in
1:Selects audio from the S/PDIF audio in
6: Sets to default EDID
*based off highest common resolution between source and 1080p, 720p, and 480p
7:EDID learn mode
4.POWER LED - Illuminates when receiving power
5.DC 5V POWER - Plug the included power supply here
EDID Learn
1.Turn on the HD610
2.Connect display to HDMI out
3.Turn the dial clockwise from 0 to 7
Status LED will illuminate while learning. When LED goes dark, the status LED will go dark. 4. Turn the dial clockwise from 7 to 0 (or 1 if using S/PDIF audio)
Do not go past 6 or the learned EDID will erase and reset to default
atlona.com | 4 | Toll free: |
Local: | ||
|
|