RC/GS
The following text replaces the first paragraph under “Equalizing Charging” on page 36.
To activate Equalize mode, press and hold the Settings button (right arrow) until the screen clears and Equalizing appears (approximately 6 seconds). The Charge LED indicator flashes approximately two times per second in equalize mode. The equalize charge will continue for 3 hours, and then automatically change back to float charging.
Trademarks Xantrex and XPower are trademarks of Schneider Electric Services International sprl, registered in the U.S. and other countries. Other trademarks, registered trademarks, and product names are the property of their respective owners and are used herein for identification purposes only.
Notice of Copyright Errata to the RV Series Remote Control Owner’s Manual © February 2009 Xantrex Technology Inc. No part of this document may be reproduced in any form or disclosed to third parties without the express written consent of:
Xantrex Technology Inc.
Xantrex Technology Inc. reserves the right to revise this document and to periodically make changes to the content hereof without obligation or organization of such revisions or changes unless required to do so by prior arrangement.
All warranty, disclaimer and safety information is contained within the primary documentation received with your unit. Please ensure you are familiar with that information before proceeding.
Date and Revision February 2009 Rev A | Part Number | |
Contact Information |
| |
Telephone: | 1 800 670 0707 (toll free North America) 1 408 987 6030 (direct) +34 93.433.8350 (Europe) | |
Fax: | 1 800 994 7828 (toll free North America) 1 604 422 2756 (direct) +34 93.433.8351 (Europe) | |
Email: | support.europe@xantrex.com | Web: www.xantrex.com |
4 |