Installation
2 Installation
Refer to the owner’s manual of the computer for connections. In the process of connecting external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.
Connecting Your LCD Monitor to a Computer
Method 1 : Analog (D-SUB) Connection
1Turn off the computer and unplug the power cord.
2Connect the signal cable to the
3Connect the audio cable to the out port on the back of the computer.
4Connect the power cord to the LCD monitor and wall outlet.
5Press the 
button, located on the bottom side of the main unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.
12 | Xerox© LCD Monitor User’s Manual |