Zenith ZN-411 manual Advanced Button Functions, TV/VCR Punch-Through

Page 5

Advanced Button Functions

DVD

Scan+ and Scan- buttons control the speed of Fast Forward and Reverse Playback respectively. Chapter+ and Chapter- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. Repeat button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.

Play button is used to start Disc playback and for Menu selection on some DVD players.

Stop button stops Disc playback.

Pause button will pause Disc playback - press Play to resume.

Note - in DVD Mode the INPUT button activates the DVD Player’s SETUP Menu.

MENUIN/OUT

The Menu In/Out button allows you to toggle in and out of Menu Mode. Pressing Menu In/Out brings up your device Menu. While in Menu mode the remote’s red indicator light blinks continuously. The remote will exit Menu Mode after 20 seconds if no keys are pressed. While Menu Mode is active, the Menu, Channel, Volume, Mute and Mode keys perform the following functions:

MENU IN/OUT Exits/Enters Menu mode. CHANNEL UP/DOWN Up/Down commands for on- screen Menu navigation.

VOLUME UP/DOWN Right/Left commands for on- screen Menu navigation.

MUTE OK/Select command for on-screen Menu selection.

TV Mode Key Quit, Exit or Clear command to quit on- screen Menu and return the remote to normal operation (red indicator is now off). Note this action is also available by pressing any Mode key.

8

TV/VCR Punch-Through

VCR Punch-through is only available in TV, and Cable modes, i.e. the 6 VCR keys (Play, Pause, Stop, Record, FF and Rewind) will punch-through to the device pro- grammed under VCR when in TV mode.

The TV/VCR/INPUT button performs the TV/VCR antenna switch function when in VCR Mode.

The TV/VCR/INPUT button performs the A.B switch function when in Cable Mode.

The TV/VCR/INPUT button performs the INPUT source switch function when in TV Mode.

The TV/VCR/INPUT button performs the DVD Setup function when in DVD Mode.

Misc.

CCwill activate the Closed Caption feature if your device has that feature.

TV/VCR and TV/DVD Combo units

Note that for some TV/VCR and TV/DVD combo units you might need to set up two different buttons to control both parts of the combo unit. E.G., (referring to the Direct Code Entry section on the following page) you might need to set up a code under the TV button to control the TV part of the combo unit AND a separate code for the VCR or DVD under any other button you choose.

9

Image 5
Contents ZN411 Front Cover Art Table of Contents Introduction Battery Saver Battery InstallationPower-On Default TV Volume/Mute Punch-ThroughTV, VCR, DVD Button Functions Button Functions,TV/VCR Punch-Through Advanced Button FunctionsProgramming with Code Search Code EntryDirect Code Entry Code List Sleep TimerCode Identification Code IdentificationCable Laser DiscRadioshack AkaiAudio Dynamics Kodak LloydProduct Operation TroubleshootingDay Warranty