Zenith XBS341 Instant Timer Recording, Checking the Recording Time, To extend the Recording Time

When you desire the recording to begin, press DVD+Hi-Fi VCR’s REC/ITR (z) once to start.

VCR Operation (Continued)

Instant Timer Recording

Instant Timer Recording allows you to make a recording easily of a preset length without using the programma- ble timer.

Preparation:

Turn on the power of both the DVD+Hi-Fi VCR and the TV.

Be sure the TV is tuned to the DVD+Hi-Fi VCR output channel (3 or 4).

If a direct VIDEO/AUDIO connection is made between the DVD+Hi-Fi VCR and the TV, set the TV’s source selector to

VIDEO.

Insert a video cassette with the anti erasure

1 safety tab intact.

Select the desired channel with v/V or number

2 (0-9).

The channel number appears on the TV screen.

If you are recording from another source via audio/video input jacks (at the Rear or Front panel), select LINE1 or LINE2. with INPUT.

3 Select the desired recording speed (SP or SLP) with SPEED.

The tape speed will appear on the TV screen.

4The menu as illustrated, will appear on the TV screen.

Recording will start. (The indicator will light)Press REC/ITR (z) twice.

5recording time length.

At the end of the recording, the DVD+Hi-Fi VCR will stop recording and shut off.

Whlie Instant Timer Recording is active, changing the

channel on the DVD+Hi-Fi VCR will not be possible. To stop the recording, press STOP or POWER twice.Press REC/ITR (z) repeatedly to select the

INSTANT TIMER RECORD MENU

INSTANT TIMER RECORD		0H30M ..... 9H00M ➝ 0H00M
CHANNEL	2
			Length Display
SPEED	SP
		(each additional press of
START	NOW	REC/ITR (z) increases recording
LENGTH	0H30M		time 30 minutes)

Checking the Recording Time

Press REC/ITR (z) once to check the recording time. The recalled setting will automatically return to the TV screen after 6 seconds.

To extend the Recording Time

The recording time can be extended anytime by press- ing REC/ITR (z).

Subsequent presses result in advancing the recording time by 30-minute increments.

otes

If you press PAUSE/STEP (X) while in instant timer record- ing mode, the DVD+Hi-Fi VCR will enter the recording pause mode. Instant timer recording is cancelled.

If the DVD+Hi-Fi VCR is set to “0H00M”, the DVD+Hi-Fi VCR goes to normal recording mode.

Dubbing and Editing

If you wish to edit or dub your camcorder (or another VCR) recordings to this DVD+Hi-Fi VCR, the rear (or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and easy. These direct A/V jacks will also provide better picture results than using the RF jack on the rear panel.

1outputs to your DVD+Hi-Fi VCR as illustrated on page

13.Connect the camcorder’s (or another VCR’s) A/V

2 Set the input channel “LINE2”. (Use INPUT to select LINE2.)

If you have connected your DVD+Hi-Fi VCR to the A/V input jacks on the rear of DVD+Hi-Fi VCR, you should select the input channel LINE1 by pressing INPUT twice.

3VCR). If you have a TV attached to your DVD+Hi-Fi VCR, you can see the video playing.Play the tape in the camcorder (or another

4

otes

Before recording, please confirm the recording start position. To stop the editing, press STOP (x) twice.

Copying from DVD to VCR

This unit is capable of copying the contents of a DVD to a VHS tape.

ote

If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. “LOCK” is displayed in the display window.

Insert Disc

1 Insert the disc you wish to copy in the DVD deck and close the disc tray.

Insert VHS Tape

2 Insert a blank VHS video tape into the VCR deck.

Press PLAY ( B) on the DVD deck.

3 The DVD will go into play mode

If the DVD disc menu appears, you may need to press PLAY ( B) manually to begin copying.

4 Press REC/ITR (z) on the front panel or remote control.

The DVD+Hi-Fi VCR will go into Record mode. “COPY” indicator will light.

Stop the Copy Process

5 When the DVD is finished playing, press STOP (x) or POWER twice to end copying.

You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

ote

When you stop the DVD playback during copying, VCR recording mode also stops automatically.

26