Operation
Playing a DVD
Playback Setup
1.Turn on the TV and select the video input source connected to the DVD player.
2.Turn on the audio system (if applicable) and select the input source connected to the DVD player.
3.Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the playback side down.
4.Press OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, press PLAY.
In some cases, the disc menu might appear instead:
DVD
Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or DVD MENU to return to the menu screen.
Notes:
•If parental control is set and the disc is not within the rating settings you must input the password. (See “Lock Menu” on page 15.)
•DVDs may have a region code. Your player does not play discs that have a region code different from your player. The region code for this player is 1 (one).
Last Scene Memory DVD | CD |
This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene is automatically recalled.
Note:
This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc.
Screen Saver
The screen saver appears when you leave the DVD player in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the DVD Player automatically turns itself off.
General Features
Note:
Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
Moving to another TITLE DVD
When a disc has more than one title, you can move to another title. Press DISPLAY while playback is stopped then the appropriate number
Bto move to another title.
You can play any title by inputting its number while playback is stopped.
Moving to another CHAPTER DVD
When a title on a disc has more than one chapter you can move to another chapter as follows:
•Press SKIP . or > briefly during playback to select the next chapter or to return to the beginning of the current chapter.
•Press SKIP . twice briefly to step back to the previous chapter.
•To go directly to any chapter during DVD playback, press DISPLAY and press v / V to select the chapter icon. Then, input the chapter number or use b / B.
Search DVD
1.Press SCAN (m or M) during playback.
2.Press SCAN (m or M) repeatedly to select the required speed.
DVD; X2, X4, X16 or X100
3.To exit SEARCH mode, press PLAY.
16