Zenith Z42PX21D, Z42PX2D warranty Setup Menu Options, EZ Scan Channel Search, Manual Scan

Operation

Setup Menu Options

EZ Scan (Channel Search)

-Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

-Run EZ Scan again after any Antenna/Cable connection changes.

-A password is required to gain access to EZ Scan menu if the Lock System is turned on.

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select EZ Scan.

3.Press the ENTER button to begin the channel search.

Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.

Manual Scan

- A password is required to gain access to Manual Scan menu if the Lock System is turned on.

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Manual Scan.

3.Press the G button and then use D / E button to select TV, DTV, CATV, and

CADTV.

4.Press the G button and then use D / E button to select channel number you want to add or delete.

5.Press the ENTER button to add or delete for the channel number.

6.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Notes:

•This channel number is a physical channel number, which is different from the normal channel number shown in Channel Edit.

•When inserting the CableCARDTM, CATV, CADTV is not working in Manual Scan.

•TV: analog antenna(over-the-air) TV signal

DTV: digital antenna(over-the-air) TV signal

CATV: analog cable TV signal

CADTV: digital cable TV signal

206-4022 Owner’s Manual 23