Connection and Installation, Resetting the unit

Connection and Installation

VGA and Audio source

HDTV

AT-PA100-G2 (optional amp) Purchase at atlona.com

Integrated Amplifier

To reset the HD500 use the following steps:

1.Press and hold the menu button for five seconds

2.While still holding the menu button, unplug the HD500

3.After 5 seconds of holding the menu button while the HD500 is unplugged, plug the HD500 back in.

4.Hold the Menu button for 5 more seconds as the HD500 comes on

5.Release the menu button and the reset is complete

Note: Re-establishing the connection between the source, HD500, and display may take up to a minute after the reset is complete