CONTROL REFERENCE GUIDE
1 | 2 | 3 | 4 |
Front View
Back View
5 6 7
1)Remote Sensor
Receives infrared signals from the remote control.
2)
Press to select the channel upward or downward.
3)
Button
Turns the power on or restores the unit to the standby mode.
4)STANDBY/ON Indicator Green: power on
Red: standby mode
5)ANTENNA RF IN Terminal Connect the AIR antenna.
8
6)TV RF OUT Terminal
Use to connect yourTV using a coaxial cable. When this Conventer Box is powered on, analog RF signals output from the TV RF OUT terminal.
When this Conventer Box is in standby state, analog RF TV signals pass through the box and output from the TV RF OUT terminal.
7)AUDIO OUT / VIDEO OUT Jacks
Outputs audio/video signals to a connected TV.
8)DC IN 9V Jack
Connect the supplied AC adapter.
- 10 -