QUICK START GUIDE (CONTINUED)
•IF YOUR DEVICE DOES NOT RESPOND, FOLLOW STEPS 1 THROUGH 6 WITH EACH CODE LISTED FOR YOUR BRAND. IF NONE OF THE CODES LISTED FOR YOUR BRAND OPERATE YOUR DEVICE, THEN TRY “SEARCH METHOD” ON PAGE 12.
•SOME CODES ARE QUITE SIMILAR. IF YOUR DEVICE DOES NOT RESPOND OR IS NOT FUNCTIONING PROPERLY WITH ONE OF THE CODES, TRY ANOTHER CODE LISTED UNDER YOUR BRAND.
•IF THE ORIGINAL REMOTE CONTROL DID NOT HAVE A POWER KEY, PRESS PLAY INSTEAD OF POWER DURING STEP 5.
•WRITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK, EASY REFERENCE.
SEARCH METHOD
If your device does not respond to the remote after trying all codes listed for your brand, try manually searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes con- tained in the memory of the remote. The Search Method may also work if your brand is not listed at all.
TO SEARCH FOR YOUR TV CODE:
1.Switch your Television on (not on standby).
2.Press TV.
3.Aim the remote at your television. Hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P.
4.Press 9 9 1. The bottom part of the IR Indicator blinks twice.
5.Press POWER. If the TV turns off, you have found your code. If not, press the TV key to cycle to the next code, and press POWER again. Repeat this process until you find the code that turns off your TV. You may have to repeat this sequence many times so please be patient. Remember to keep pointing the remote at your television while pressing these keys.
6.When your television switches off, press P to store the code.
Now your remote is ready to control your television.
12 Quick Start Guide