CONNECTIONS
CONNECTING TO SOURCES WITH COMPONENT VIDEO OUTPUT (DVD - ONLY 480I, 480P, 720P & 1080I ARE SUPPORTED)
Devices with component video output must be connected to the YUV input:
Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included).
Make sure you connect both audio and video from the same source to YUV IN.
Note:
Please refer to the user manual for your component video source for more information and connection details.
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the right (red) and left (white) audio OUTPUT from this unit to the right (red) and left (white) audio INPUT on your amplifier. Refer to your amplifier’s user manual for more information.
Note :
To control the audio, both the TV and the amplifier must be turned on, and the volume of the amplifier must be set above 0, or you will not hear any sound.
If you want to hear the volume of the amplifier only. Press the volume – button of TV to decrease the volume or press the MUTE button of remote control to turn off the sound.
12
PLV16151S1 VEN - WM CANADA.pmd | 12 | 1/10/2007, 5:06 PM |