StarTech.com VGA2NTSCPRO manual Installation, Rear View, Front View

Page 5

6

Horizontal/Vertical Scaling

The VGA2NTSCPRO allows horizontal and vertical scaling so that an image can be scaled to meet the visible part of your TV screen. If you are in Zoom mode, vertical scaling is disabled.

1.

Press the Menu button to call up the OSD menu.

2.

Use the +/- buttons to scroll to the H/V Scaling icon. Press the Select button to view

 

the scaling settings.

3.

A pair of small arrows will indicate whether you are in Vertical or Horizontal scale

 

mode. Use the Select button to toggle between Vertical and Horizontal mode.

4.

The + button will spread your screen out towards the edges. The - button will

 

“tighten” or shrink the screen.

Installation

Rear View

DC 9V

VGA In

 

Monitor

 

Connects to your computer’s

 

Connects to your

 

Connects to

 

 

VGA/monitor port using HD

 

monitor using

 

power adapter

 

 

15-pin VGA extension cable

 

monitor cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

C-Out

Connects the composite video cable to your TV’s composite port

S-Out

Connects the S- Video cable to your TV’s S- Video port

5. Once you are happy with your scaling settings, allow the converter to sit idle for a

few seconds. This will save the scaling settings and exit the OSD automatically.

Front View

-/+

 

Menu

Scrolls through

Select

 

menu options

Selects a menu

Toggles the on-

 

and settings

option or setting

screen menu

 

 

 

display

 

 

 

Positioning

The positioning function allows you to move your TV image both vertically and horizontally.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Positioning icon. Press the Select button to view the positioning settings.

3.A pair of small arrows will indicate whether you are in Vertical or Horizontal positioning mode. Use the Select button to toggle between Vertical and Horizontal mode.

4.Depending on your mode, the + button will shift the display either up or right. The - button will shift the display either down or left.

5.Once you are happy with your position settings, allow the converter to sit idle for a few seconds. This will save the position settings and exit the OSD automatically.

RGB Out

IR Receiver

Connects to

Aim remote here

SCART port

 

on television

 

Power LED

Indicates if device is powered (ON) or not (OFF)

Video/RGB

NTSC/PAL

Power

Toggles between

Toggles between

Turns power to

Composite/S-Video (IN)

NTSC (IN) or

converter on (IN) or

or RGB/SCART (OUT)

PAL (OUT)

off (OUT)

systems

systems

 

 

 

 

Brightness

There are four brightness levels supported by the VGA2NTSCPRO.

1.Press the Menu button to call up the OSD menu.

2.Use the +/- buttons to scroll to the Brightness icon. Press the Select button to view the brightness settings.

3.Use the +/- buttons to set the desired brightness level.

4.Once you are happy with your brightness settings, allow the converter to sit idle for a few seconds. This will save the brightness settings and exit the OSD automatically.

1.Make sure that the converter, computer, monitor, and television are all turned off.

2.Unplug your monitor from your computer. Plug your monitor’s cable into the converter’s Monitor port.

3.Connect the 15-pin high density extension cable to your computer’s VGA card/ monitor port and the converter’s VGA In port.

4.Depending on your television, use the appropriate cable to connect either the S-Out(S-Video)port, the C-Out (composite video) port, or the RGB Out (SCART) port to your television.

5.Make sure that the NTSC/PAL button is set appropriately: IN for NTSC systems, OUT for PAL video systems.

Image 5
Contents Professionals’ Source For Hard-to-Find Computer Parts Video ConverterTechnical Support Warranty InformationFCC Compliance Statement On-line helpTable of Contents TroubleshootingBefore You Begin Introduction FeaturesUsing the Remote Front View InstallationRear View Sharpness Using the On-Screen DisplayZoom Panning
Related manuals
Manual 12 pages 50.27 Kb