Installing the TR-4 Scsi Internal Tape Drive

each item in the list, press the Enter key and use the arrow keys to move between items. Press the Enter key to select the item. Press the Esc key to return to the previous screen.

Also, make sure that the tape drive is reported as ªInstalledº. The order of the list is important. The drives should be de®ned as:

Drive 0 is the master on primary IDE.

Drive 1 is the slave on primary IDE.

Drive 2 is the master on secondary IDE.

Drive 3 is the slave on secondary IDE.

An empty item is reported as a ªHard Disk Driveº and ªNot Installedº.

Note: The BIOS reports the tape drive incorrectly as a CD-ROM, but this does not cause a problem with operation.

8.Save the con®guration and exit the Con®guration/Setup Utility.

Installing the TR-4 SCSI Internal Tape Drive

This section provides instruction for installing the SCSI internal tape drive. To install this drive, you must have the following:

vA SCSI bus adapter that is a single-ended SCSI and meets SCSI-2 (ANSI X3.T92) or SCSI (ANSI X3.131-199X Rev.10h) standards

vThe documentation that comes with your store controller

Step 1. Planning Your SCSI Con®guration

You must plan what SCSI ID to give the tape drive connected to the SCSI bus adapter. Each device on the adapter bus must have a unique ID. You cannot assign a device 7 because most SCSI bus adapters use that as their ID. Typically, assign the higher SCSI ID numbers to those devices that are most often used or are faster than other devices in the SCSI chain. The tape drive is preset at the factory to SCSI ID 0. Refer to your SCSI bus adapter documentation for more information.

For most Store Controllers, you can press F1 during startup to view your Store Controller and SCSI bus adapter con®guration. Other Store Controllers can have different procedures to view the con®guration. Some SCSI adapters have utility programs that allow you to view the SCSI con®guration, or you might have to physically inspect the installed SCSI devices to see how the IDs are set. For more information, refer to the documentation that comes with your Store Controller or SCSI bus adapter.

Step 2. Preparing for Installation

1.Turn off the Store Controller and unplug the power cables from the power outlet for the Store Controller and all attached peripherals.

2.Open the Store Controller. For speci®c information on opening your Store Controller refer to the documentation that comes with your Store Controller.

3.Touch the static-protective bag containing the tape drive to an unpainted metal surface on the Store Controller for at least 2 seconds. Remove the drive from the static-protective bag, holding the drive by the edges, and place it on the bag.

Chapter 2. Tape Drive Installation 7

4690 specifications

The IBM 4690 is a renowned point-of-sale (POS) system that has been pivotal in the retail and hospitality industries since its introduction in the late 1980s. Notably associated with IBM’s family of retail hardware and software solutions, the 4690 has transformed the modern retail environment, providing a robust platform for transaction processing and inventory management.

One of the main features of the IBM 4690 system is its powerful software architecture. Designed to efficiently handle high transaction volumes, it integrates seamlessly with various peripheral devices such as barcode scanners, receipt printers, and payment terminals. The system's user-friendly interface allows staff to process sales quickly and efficiently, enhancing the overall customer experience.

In terms of technology, the IBM 4690 operates on a proprietary operating system that supports a variety of programming languages, allowing retailers to customize applications to meet their specific needs. This flexibility not only streamlines operations but also enables retailers to implement specialized services such as loyalty programs and promotions. The hardware is designed for durability and reliability, essential in high-traffic retail environments.

Another significant characteristic of the IBM 4690 is its robust reporting capabilities. The system provides comprehensive sales reports, inventory analyses, and customer insights, all of which are essential for strategic decision-making. This analytical power helps businesses identify trends, forecast demand, and optimize stock levels, ultimately leading to improved profitability.

Furthermore, the IBM 4690 is known for its strong security features. By utilizing advanced encryption technologies and compliance with industry standards, the system helps protect sensitive customer data and payment information, ensuring a safe transaction environment.

The longevity and adaptability of the IBM 4690 system underscore its value in the retail sector. Even with newer technologies emerging, many businesses continue to rely on the robust functionality and proven performance of the 4690. With ongoing support and upgrades, the system remains a reliable choice for retailers looking to enhance their operational efficiency while delivering excellent customer service.

In summary, the IBM 4690 stands out due to its feature-rich software, durable hardware, robust reporting and analytics, and stringent security measures. These characteristics make it an indispensable tool for retailers aiming to thrive in an ever-evolving marketplace.