Winegard AS-2053, AS-2003 installation manual Mounting interior wall plate controller

Page 16

Mounting interior wall plate controller

Inside your vehicle, choose a convenient location for the wall plate controller. Con- sider wiring layout and distance from your television set. The wall plate uses the nine-wire mulit-colored cable.

1.Strip end of each wire. Place in harness in the locations indicated in Figure 11. Be sure there are no individual “strays” from the wires that are not in the slot. These “strays” can interfere with operation.

2.After putting each wire in the appropriate slot, tighten the screw.

3.When all wires are in place in the harness end, plug this into the back of your wall plate control panel, as shown in Figure 11. DO NOT plug in upside down or incor- rectly; your unit will not operate, or you may cause irreparable damage. Note label

on

board to help with positioning of plug.

FIGURE 11

1. WHITE

2. PURPLE

3. BLUE

9. BLACK

4. GREEN

5. YELLOW

8. BROWN

6. ORANGE

7. RED

4.Mount the wall plate controller flush with the wall or inside a cabinet. Push the wire harness through the hole, connect to the wall plate and secure screws.

You can also use the surface mount box (provided), Figure 12. When using mount box, you may

have to knock out the portion of the box indicated

by the dotted line in Figure 12.

Surface Mount

 

Box for Wall

 

Plate Controller

FIGURE 12

 

Box can be

 

mounted two

 

ways, as shown.

 

16

Image 16
Contents Satellite System Patent no ,532,710 Made in U.S.AImportant Safeguards Table of Contents Uplink Signal Programming Uplink Control Centers Introduction/How Does Digital Satellite TV Work?RED LEDs 4 Indicate mode is in use ONE Receiver Hookup TWO Receiver HookupSystem Operation First Time USEDo not try to stop system Press the Park button twoPress the Search button One 1 time. The SearchControl Panel Operation/Check Switch Routine Installation Parts/Specifications/Warranty Parts includedInstallation requirements 29.9Front of Vehicle Center Line Coach Driver Roof SideRoof installation BOX to the First Clamp Must beThis Time Do not Apply Sealant AT this TimeExternal GPS Installation Not Apply Sealant to ANY Surfaces Until YOU Test Your Unit For Directv For ExpressVu NetworkMounting interior wall plate controller Wiring the system WiringFor proper operation Antenna LB-6000 StandardBase Assembly Turret Assembly Plug See Detail Rotate Limit Switch BlackCover installation Troubleshooting the system OFF & Search LEDs are onON, PARK, Search & OFF LEDs are on On & OFF LEDs are onSymptom Unit may not park Testing Voltages to Check ElectronicsSymptom Unit may fail to rotate or elevate Warranty Return Authorization Policy

AS-2003, AS-2053 specifications

The Winegard AS-2053 and AS-2003 are two advanced outdoor satellite antennas that provide exceptional performance for satellite television reception. Designed with the latest technologies and superior engineering, these models are well-suited for both residential and commercial applications.

The AS-2053, known for its robust construction and high gain, features a unique aerodynamic design that minimizes wind resistance and enhances stability during adverse weather conditions. This antenna boasts a powerful signal amplification system that ensures clear and reliable reception of satellite signals, even in areas with challenging terrain or foliage. The AS-2053 is particularly favored by RV enthusiasts and campers who require dependable satellite access on the go.

Conversely, the AS-2003 offers a more compact profile while retaining high performance standards. This model is perfect for urban environments where space may be limited but the need for reliable television signals remains paramount. The AS-2003 employs innovative technology that optimizes signal reception within a smaller footprint, making it feasible for apartment complex installations or properties with restrictive zoning regulations.

Both antennas are equipped with a state-of-the-art rotor system that allows them to automatically position themselves toward the satellite for optimal signal strength. This technology eliminates the need for manual adjustments, making installation straightforward and user-friendly.

In terms of compatibility, the Winegard AS-2053 and AS-2003 are designed to work seamlessly with a range of satellite providers, ensuring that users have the flexibility to choose their preferred service. The antennas are constructed with durable materials that withstand harsh weather, including exposure to UV rays, rain, and snow.

Another significant feature of these models is their ease of installation. The antennas come with comprehensive mounting kits and user-friendly manuals, allowing even those with minimal technical expertise to set them up quickly and efficiently. Additionally, Winegard provides excellent customer support, ensuring that any issues can be addressed promptly.

In summary, the Winegard AS-2053 and AS-2003 antennas stand out for their high performance, durable construction, and innovative technologies. Whether for recreational vehicles or stationary residential use, these antennas are designed to deliver superior satellite reception, making them a top choice for users seeking quality and reliability in their television viewing experience.