Warranty & Warranty Registration

NOTE: Read the entire instruction manual before you start installation and assembly.

WARNING

•Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support.

•This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.

•This product should only be installed by someone of good mechanical ability, with basic building experience and a full understanding of this manual.

•Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

•If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.

•Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

•Tighten screws firmly, but do not over tighten. Over tightening can damage the items, greatly reducing their holding power.

•This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

5-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

*No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

13-09-231-9332A1-EN.indd 2

10/31/2013 11:50:15 AM

DWM1737MN specifications

The Tripp Lite DWM1737MN is a remarkable solution for anyone in need of a versatile and high-quality wall mount for their flat-screen displays. Designed with both functionality and durability in mind, this mount caters to a wide range of display types from various manufacturers, making it an excellent choice for homes, offices, or commercial setups.

One of the standout features of the DWM1737MN is its compatibility with a vast array of VESA sizes. Supporting VESA configurations ranging from 75x75 to 200x200 mm, the mount can accommodate screens from 13 to 37 inches in size and up to 44 pounds in weight. This flexibility allows users to easily adapt the mount for different displays, ensuring that it can be utilized in various environments without the need for multiple mounting solutions.

The mount offers full tilt and swivel capabilities, allowing users to adjust their displays for optimal viewing angles. With a tilt range of up to 15 degrees and the ability to swivel up to 180 degrees, the DWM1737MN ensures that viewers can enjoy their content comfortably, regardless of their position in the room. This is particularly beneficial in settings such as conference rooms or family entertainment areas, where multiple viewing positions may be utilized.

Additionally, installation is straightforward, thanks to the included mounting hardware and user-friendly instructions. The wall plate features a lightweight, yet robust design to ensure stability once mounted. For added security, the DWM1737MN allows for a lockable design, providing peace of mind for environments that may have higher foot traffic or potential tampering.

Another notable characteristic of this mount is its sleek aesthetic, employing a low-profile design that minimizes the space needed while enhancing the visual appeal of the setup. The black finish ensures that it integrates seamlessly into most décor styles, making it a versatile choice for various settings, whether modern or traditional.

Enhancing the user experience, the Tripp Lite DWM1737MN incorporates cable management features that help to keep wires organized and reduce clutter. This thoughtful design element adds to the overall clean look while ensuring that all cables are easily accessible.

In conclusion, the Tripp Lite DWM1737MN is an exceptional wall mount that boasts compatibility, adjustability, and a sleek profile. With its user-friendly installation and robust design, it stands out as a top choice for anyone looking to maximize their display options while maintaining an organized and stylish environment.