Turning On/Off
POWER |
|
| CH |
VOL | VOL |
- | + |
CH
MENUENTER
C.SYS ZOOM CLK SLP
AUTO.ADJ P.M DSP
1 2 3
4 5 6
7 8 9
AV 0
OSD
STILL POSITION Bass+ Treb+
Bass - Treb-
Turning On
1.Insert the output plug of the AC power adaptor into the DC power input of the unit.
2.Press the power switch on AC power adaptor and the red indicator lights up, the TV/Monitor is in STANDBY mode.
3.Press the POWER button on the unit's control panel or the button 
on the remote control to turn on.
Notes:
In TV mode, when there is no TV signal input for about 15 minutes, the set goes to STANDBY automatically.
Turning Off
1.If you want to turn off the power completely, press the power switch on the AC adaptor.
2.If you want to turn off temporarily, press the POWER button on the unit's control panel or the 
button on the remote control, the set goes to STANDBY and the indicator turns to red.
Notes:
This TV set can automatically turn off by:
1.When there is no TV signal input for about 15 minutes;
2.Sleep timer;
3.Off timer.
Selecting input signal
1.Press the AV button on the remote control or SOURCE button on the set's panel to select input mode. You can select TV, AV,
2.If you want to go to TV mode, press AV button repeatedly to select TV mode.
3.Press DSP button, the screen display current mode. Press ENTER to cancel OSD.
16