Palsonic TFTV552LED owner manual Troubleshooting, Remote control does not operate, Double images

Page 33

Troubleshooting

If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area.

Before calling service, please check the symptoms and follow suggested solutions.

Remote Control

Problem

Remote control does not operate

Possible Solutions

!The batteries could be weak. Replace the batteries.

!Check the orientation of the batteries.

!Make sure the power cord is plugged in.

Video and Audio

Problem

Possible Solutions

No picture (screen not lit), No sound

!Make sure the power cord is plugged in.

!Press POWER on the TV or on the remote control.

!Try another channel; it could be station trouble.

Dark, poor or no picture (Screen lit), good sound

!Select a proper picture mode.

!Adjust the brightness in the video setting.

!Check the antenna connections.

No color/dark picture/color

!

Adjust the color saturation in the video setting.

is not correct

 

 

 

 

 

Only snow and noise appear

!

Check the antenna connections.

on the screen

!

Try another channel; it could be station trouble.

 

 

 

Dotted lines or stripes

!

Adjust the antenna.

 

! Move the TV away from noise sources such as cars, neon signs, or hair dryers.

 

 

 

Double images

!

Using a highly directional outdoor antenna or a cable may solve the problem.

 

 

 

Good picture, no sound

!

The sound may be muted. Press MUTE again to cancel.

 

! Make sure the stereo mode is set to stereo or mono.

 

 

 

Audio noise

!

Communication problems may occur if infrared communication equipment (e.g.,

 

 

infrared cordless headphones) is used near the TV. Move the infrared

 

 

communication equipment away from the TV until the noise is eliminated.

 

 

 

30

Image 33
Contents AUSTRALIA1300 657 N111Important Information Table of Contents Important Safety Precautions Important Safety Precautions To clean this unit, wipe with a soft, dry cloth Important NoticeDo not use in hot and cold rooms locations Using the Remote Control Installing the BatteriesPreparations Power Connection Antenna ConnectionInsert the AC plug into a conveniently located AC outlet Main Unit front view/side view Identification of ControlsMain Unit rear view Colored buttons RED/GREEN/YELLOW/BLUE Direct Remote Control UnitConnecting Digital Coaxial Audio Connecting a CamcorderHow to connect ConnectionsConnecting a Computer Connecting Component VideoTo connect a device using component video To play component video from an external deviceConnecting a VCR for Recording Connecting an Hdmi deviceHow to connect a device using Hdmi Connection To play from the device using HdmiMain Menu Overview Basic OperationsList of main menus to help you with operations To navigate through the OSD main menuSelecting the Input Signal Source Turning On/Off the PowerDisplaying the Information Banner Turning OnAuto Channel Search Memorizing the ChannelsManual Searching for DTV programs Press Menu and the main menu screen displaysManual Fine Tuning Setting Audio SystemManual Searching for ATV programs Setting Favorite Channels Labeling ChannelsOpen the Programme Edit menu To skip unnecessary channels Channel List ManagementTo sort channels To delete channelsChannel and Program Selection Customizing the Picture Picture AdjustmentAdjusting the Volume Sound AdjustmentAdjusting the Sound Using the volume buttons VOL+ and VOLAudio Track Selection for digital channels Stereo/Bilingual Selection for analog channelsNicam Broadcast Selection IGR German stereo system BroadcastsSystem Setup System SetupLanguage Hearing ImpairedPassword Setup Rating and Lock SetupBlock Program Setup To create a new passwordParental Guidance Setup DTV only Lock Tuning SetupRestoring Factory Default Current Time Setup Timer SetupOn Timer Setup Time Zone SelectionOff Timer Setup Sleep Timer SetupAuto Sleep Setup Operation EPG OperationProgram’s information will be displayed Press Yellow button again to exitTeletext & Subtitle TeletextSubtitle Screen Setup Screen Setup for D-SUBPC ModeAuto adjust Such as position and phaseTroubleshooting Remote control does not operateDouble images One or some channels can’t be Current input modeDisplayed Section Select them with 0-9 number buttonsLED TV SpecificationsVer.1.0