Memorizing the Channels & Programme Edit
ATV manual tuning
- analogue only - Use the Manual Tuning operation if desired channels can not be preset by Auto Tuning or if you would like to preset channels to specific position numbers one by one.
|
|
|
|
| 1 |
PICTUREPicture | SOUNDSound | TIME | OPTION | LOCK | CHANNEL |
Auto Tuning |
|
|
| 2 | |
DTV Manual Tuning |
|
| |||
ATV Manual Tuning |
|
|
| ||
|
|
|
| ||
Programme Edit |
|
|
|
| |
File System |
|
|
|
| |
| SELECT |
| MOVE | MENU | RETURN |
ATV Manual Tuning | ||
Storage To | 11 | |
System | BG | |
Current CH | ||
Search |
| |
| ||
Frequency | 445.25 MHz | |
EXIT | SAVE | SELECT |
In CHANNEL menu, press 6or5to select ATV Manual Tuning, then press4or OK to access the setting menu.
From ATV Manual Tuning setting menu, press 6or5to select an item, press 3or4to set the item as shown below.
A. Storage To: Position selection. Press 3or4button to select the position you want to store.
B. System: Sound system selection. If certain channel’s sound is abnormal, it may be that the sound system setting is wrong. In this case, select another sound system.
C. Current CH: Selects current channel using 3or4.
D. Search: Channel search operation.
Press 4to search up the band or3to search down the band.
Press 34or repeatedly until your desired channel is displayed.
E.
Press 3or4until better picture and sound are obtained.
F. Frequency: Shows current frequency, it can not be adjusted.
(During the process, you can press EXIT to exit the operation.)
3 Press RED button to save your settings.
Adding or changing a channel label
- analogue only -
PICTUREPicture | SOUNDSound | TIME | OPTION | LOCK | CHANNEL |
Auto Tuning |
|
|
|
| |
DTV Manual Tuning |
|
|
| ||
ATV Manual Tuning |
|
|
|
| |
Programme Edit |
|
|
|
| |
File System |
|
|
|
| |
| SELECT |
| MOVE | MENU | RETURN |
Programme Edit
TV 1
TV 2
TV 3
TV 4
If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled.
1 Press MENU. Press 3or4to select CHANNEL menu, press 6to access.
2 Press 6or5to select Programme Edit, press 4or OK to open the Programme Edit menu and a programme list is displayed.
3 Within the programme list, press 65or to select a channel you want to label, press GREEN button to start to label. A cursor appears at the edit field.
4 Use 6or5to select a character, use 3or4to move the cursor. When finished, press OK to confirm.
The maximum length of label is 5 characters.
5 Repeat the above steps to label more channels.
DEL NAME MOVE SKIP Fav.List
Note: The labels of DTV channels are automatically assigned and cannot be changed by user.
20