Palsonic 6825G owner manual Fine tuning, Calling the on-screen display

1,3

DSP

2,4

Fine tuning

Please enter the SEARCH menu first

Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for better picture and sound, use Fine tuning.

1 Press CH+ or CH- button to select POSITION item.

2 Press VOL+ or VOL- buttons to select a channel number you want to fine-tune (for example, channel 99).

3 Press CH+ or CH- button to select MFT item.

4 Press and hold VOL+ or VOL- button till the best possible picture and sound are obtained.

Calling the on-screen display

You can call the on-screen display by pressing the DSP button on the remote controlle. The first press of the DSP button display the current state (if in TV mode, the current channel number will display) and the next press display the clock time. Press this button again to cancel the OSD.