Palsonic 6159G owner manual Antenna Connection, Battery installation

Installation

Antenna Connection

To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial.

Note: In case of using the Twin-lead aerial feeder (300) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied)

When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly.

Note:

When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connecting the antenna lead.

In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning strike.

Battery installation

(1) Remove the back battery cover.

Effective range of the remote control operation

(2)Insert two size AAA batteries according to the polarity indication inside the remote controller.

Notes:

1.When the remote controller is not used for an extended period of time or the batteries are worn out, please remove the batteries in time to avoid battery leakage.

2.Avoid moisture and mechanical shock to the remote controller.

3.Do not drop, dampen or disassemble the remote controller.

3