Palsonic TFTV525WS owner manual Memorising the Channels, Storing Channels in Memory Automatically

Move Select

Auto Search

Manual Search Skip Fine Tune

AFC On

Sound Mode B/G

Color Mode Auto Channel Edit

Off

Frequency 55.25

Menu to exit

Memorising the Channels

Your LCD TV can memorise and store all the available channels for both antenna and cable channels. After the available channels are memorised, use CH+/- to scan the channels.

Storing Channels in Memory Automatically

1 Press MENU to display the menu main page.

Channel

2 Press CH+/- repeatedly to select Channel page. 3 Press ENTER or VOL+/- to access the submenu.

4 The Auto Search item will be highlighted automatically.

5 Press ENTER or VOL+/- to store channels in memory automatically.

The unit will begin memorising all the available channels. During the process of the Auto Search, you can press Menu to exit.

Note:

Before you start Auto Search, please refer to the part of [Setting Color and Sound System] to select a proper sound system according to your area.

Manual Search

Use Manual Search if desired channels cannot be memorised or if you would like to store channels to specific channel numbers one by one.

			Channel
1	Repeat steps 1~3 in [Storing Channels in Memory Automatically] to access the
		Auto Search		Off
	Channel menu page.	Skip
		Manual Search
2		Fine Tune
	Press CH+/- repeatedly to select Manual Search item.	AFC	On
		Sound Mode	B/G	Frequency
3		Color Mode	Auto
	Press VOL+/- to start manual search.	Channel Edit		55.25
		Move	Select	Menu to exit
	Pressing VOL+, the set searches towards higher frequency;
	Pressing VOL-, the set searches towards lower frequency;

The search stops when a program is found and this program will be stored in current channel.

Manual Fine Tuning

1 Repeat steps 1~3 in [Storing Channels in Memory Automatically] to access the Channel menu page.

2 Press CH+/- repeatedly to select Fine Tune item.

3 Press VOL+/- to fine tune till the best possible picture and sound are obtained.

If you fine tune a program manually, the AFC will be turned off automatically.

	Channel
Auto Search
Manual Search
Skip		Off
Fine Tune
AFC	On
Sound Mode	B/G
Color Mode	Auto	Frequency
Channel Edit		55.25
Move	Select	Menu to exit

Setting Auto Frequency Control (AFC)

1 Repeat steps 1~3 in [Storing Channels in Memory Automatically] to access the Channel menu page.

2 Press CH+/- repeatedly to select AFC item.

3 Press ENTER or VOL+/- to select On or Off.

When the AFC is set to On, the unit will automatically tune the program frequency to provide the best possible picture and sound.

	Channel
Auto Search
Manual Search
Skip		Off
Fine Tune
AFC	On
Sound Mode	B/G
Color Mode	Auto	Frequency
Channel Edit		55.25
Move	Select	Menu to exit

15