Palsonic 5160G owner manual Select Input Signal, Select input signal

Operations

Select Input Signal

Select input signal

Select input signal

1 Press AV/TV button on the TV set or AV button on the remote control.

When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals.

If you want to switch to TV press AV button again or follow step 2, 3 or 4.

2 Press digit buttons to switch back to TV mode. 3 Pressmode.CH+ or CH- button to switch back to TV 4 Press button to switch back to TV mode.

5 Press DSP button, the set displays current input mode.

The OSD disappears in about 5 seconds.

!Notes:

If the Timer item has been set, the current time also appears.

18:0919

11