Palsonic 8020PF owner manual To preset channels Manual search

OPERATION

Tuning in (continued)

Use the MANUAL SEARCH function if desired channels can not be preset with the

AUTO SEARCH or if you would like to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search

If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.

1.	Press the MENU button repeatedly to enter into the
	(PRESET) menu, or press the or					button to		POSITION	008
	select POSITION. Press the			or	button
								BAND	VHFL
	to select a desired position number (from							SKIP	OFF
	0~255)							SEARCH
								MFT
	Note: press the	or	button to select a channel number					AUTO MEMORY
								llllllllllllllllllllllllllllllllllllllllllllll
	within 0.7 seconds. Press and hold the					or	button

for over 0.7 seconds to select a decimal number

2.	Press the		or button to select SEARCH. Press the
		button to search channels from current channel to					POSITION	008
	higher channel (the screen displays glittering ("				").
							BAND	VHFL
	Press the			button to search channels from current channel			SKIP	OFF
							SEARCH
	to lower channel (the screen displays glittering ("					").	MFT
	When a channel is located, the searching stops, this channel						AUTO MEMORY
							llllllllllllllllllllllllllllllllllllllllllllll
	is then memorised with the preset position number.

Note: you can also make use of BAND selection to quicken the searching process in your desired band. Press the or button moves the band to the next step in the sequence below.

VHFL VHFH UHF

POSITION	008
BAND	VHFL
SKIP	OFF
SEARCH
MFT
AUTO MEMORY

lllllllllllll

lllllllllllllllllllllllllllllllll

3. When you want to store another channel at another position, repeat steps 1 & 2 above.

9